670296
204
Zoom out
Zoom in
Previous page
1/212
Next page
195
18
CONTROL COMMAND
D Data content description (continued)
q Frequency band setting
00 : HF/50 MHz frequency band
01 : 144 MHz frequency band
02 : 430 MHz frequency band
03 : 1200 MHz frequency band
w, e Memory channel number
0001–0099 : Memory channel 1 to 99
0100 : Programmed scan edge 1A
0101 : Programmed scan edge 1b
0102 : Programmed scan edge 2A
0103 : Programmed scan edge 2b
0104 : Programmed scan edge 3A
0105 : Programmed scan edge 3b
0106 : Call channel
r Split and Select memory settings
XX
r
0: Select memory OFF
1: Select memory ON
0: Split OFF
1: Split ON
When the program channel is selected, both settings
should be “0.
When the Call channel is selected, the Select mem-
ory setting should be “0.
to Operating frequency setting
See‘•Operatingfrequency.(p.190)
!0, !1 Operating mode setting
See‘•Operatingmode.(p.190)
!2 Data mode setting
1 byte data (XX)
00: Data mode OFF
01: Data mode ON
!3 Duplex and Tone settings
XX
!3
0: OFF, 1: Tone
2: TSQL, 3: DTCS
0: Duplex OFF
1: Duplex−, 2: Duplex+
!4 Digital squelch setting
X0
!4
0: Digital squelch function OFF
1: Digital call sign squelch function ON (DSQL)
2: Digital code squelch function ON (CSQL)
!5!7 Repeater tone frequency setting
!8@0 Tone squelch frequency setting
See‘•Repeatertone/tonesquelchfrequencysetting.
(p. 193)
@1@3 DTCS code setting
See‘•DTCScodeandpolaritysetting.(p.193)
@4 Digital code squelch setting
See‘•Digitalcodesquelchsetting.(p.193)
@5@7 Duplex offset frequency setting
See‘•DuplexOffsetfrequencysetting.(p.192)
@8#5 Destination call sign setting
(8characters;xed)
#6$3 R1 (Access/Area repeater) call sign setting
(8characters;xed)
$4%1 R2 (Link/Gateway repeater) call sign setting
(8characters;xed)
See‘•DVTXcallsignssetting.(p.194)
%2^0 Memory name setting
9 characters (Fixed)
See‘•Charactercodesetting.(p.190)
About clearing operation:
“1A 00” command with the format as below clears the
data of the selected memory channel.
w, e : Memory channel 0 to 99
r : FF
t or later : None
NOTE:
•Thesamedataast%1 are stored in t%1.
•WhentheSplitfunctionisON,thedataoft%1
is used for transmit.
•EveniftheSplitfunctionisOFF,enterthedata
into t%1 to match your transceiver. We recom-
mend that you set the same data as t%1.
Memory content setting
Command : 1A 00
X
rqto!0!1 !2 !4 @4!3 !5!7 @5@7@1@3!8@0
XXX…… XXXXXXXXXXX0XXXXXXXX XXXX XX XXXXXXXX XXXXXX XXXX
we
$4%1
XX…… XX ……………… ……XX XX
t%1 %2^0#6$3
XX…… XX
@8#5
XX…… XX
204


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-9100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-9100 in the language / languages: English as an attachment in your email.

The manual is 43,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info