670296
201
Zoom out
Zoom in
Previous page
1/212
Next page
192
18
CONTROL COMMAND
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Split offset frequency setting
Command : 1A 05 0015
1 kHz digit: 0–9
100 Hz digit: 0 (fixed)
100 kHz digit: 0–9
10 kHz digit: 0–9
10 MHz digit: 0 (fixed)
1 MHz digit: 0–9
Direction:
00: + direction
01: – direction
q
0XXXXXX
we
0
r
Duplex Offset frequency setting
Command : 1A 05 0017
q
XXXXX
we
X
1 kHz digit: 0–9
100 Hz digit: 0–9
100 kHz digit: 0–9
10 kHz digit: 0–9
10 MHz digit*: 0–9
1 MHz digit: 0–9
*10 MHz digit can be entered on only
the 1200 MHz frequency band.
SSB transmission bandwidth setting
Command : 1A 05 0072, 0073, 0074
XX
Lower edge
Higher edge
Lower edge
0: 100Hz
1: 200Hz
2: 300Hz
3: 500Hz
Higher edge
0: 2500Hz
1: 2700Hz
2: 2800Hz
3: 2900Hz
RX HPF and LPF settings in each
operating mode
Command : 1A 05 0067, 0075, 0080, 0085, 0090,
0091
XXXX
LPF (upper side)
HPF (lower side)
HPF
00: through
01 to 20: 100 to 2000 Hz
LPF
05 to 24: 500 to 2400 Hz
25: through
Set the LPF value larger than HPF one.
UTC Offset setting
Command : 1A 05 0155
q
XXXX
we
X X
10 hour digit: 0–1
1 hour digit: 0–9
10 min. digit: 0–5
1 min. digit: 0–9
Direction
00=+ direction
01=– direction
My position data setting
Command : 1A 05 0158
q
X
w ertyuio!0!1
XXXXXX00X0XXXXXXXX00X
Latitude Longitude
10 degree digit: 0–9
1 degree digit: 0–9
10 min. digit: 0–5
1 min. digit: 0–9
0.1 min. digit: 0–9
0.01 min. digit: 0–9
0.001 min. digit: 0–9
0 (fixed)
0 (fixed)
S*=0/N*=1
0 (fixed)
100 degree digit: 0–1
10 degree digit: 0–9
1 degree digit: 0–9
10 min. digit: 0–5
1 min. digit: 0–9
0.1 min. digit: 0–9
0.01 min. digit: 0–9
0.001 min. digit: 0–9
0 (fixed)
0 (fixed)
W*=0/E*=1
*S: South latitude N: North latitude
W: West longitude E: East longitude
201


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-9100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-9100 in the language / languages: English as an attachment in your email.

The manual is 43,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info