670296
10
Zoom out
Zoom in
Previous page
1/212
Next page
1
1
PANEL DESCRIPTION
q POWER SWITCH [POWER] (p. 31)
Push to turn ON the transceiver power.
•First,conrmtheDCpowersourceisturnedON.
Hold down for 1 second to turn OFF the power.
w TRANSMIT SWITCH [TRANSMIT] (p. 46)
Push to select transmit or receive.
•While transmitting, the MAIN BandsTX/RX indica-
tor (i) lights red. Only on the satellite mode, the SUB
Band’s TX/RX indicator (!6) lights red.
•Whilereceivingorwhenthesquelchopens,theindica-
tor lights green.
e ANTENNA TUNER SWITCH [TUNER] (p. 159)
(Frequency band: HF/50 MHz)
Push to turn the internal antenna tuner ON or
OFF (bypass).
•“ appears when the tuner is turned ON.
•Theinternalantennatunersettingscanbememo-
rized in each frequency band.
➥ Hold down for 1 second to manually start the an-
tenna tuner.
•Ifthetunercannottunetheantennawithin20sec-
onds, the tuning circuit is automatically bypassed.
r
ANTENNA•METER SWITCH [ANT•METER]
ANTENNA SWITCH Operation
(p. 158)
(Frequency band: HF/50 MHz)
➥ Push to select either the ANT1 or ANT2 connec-
tor.
METER SWITCH Operation
(p. 45)
(Frequency band: ALL)
➥ Hold down for 1 second to toggle the transmit
meter function between ALC, COMP and SWR.
t HEADPHONE JACK [PHONES]
Plug in standard stereo headphones (impedance: 8
to 16
ø).
•Outputpower:Morethan5mWwithan8ø load.
•Whenheadphonesareconnected,theinternalspeaker,
and any external speaker, are disabled.
•TheMAINandSUBBandaudiocanbemixedorsepa-
rated when using stereo headphones, depending on
the
“Phone Separate” option in the Set mode
. (p. 166)
y ELECTRONIC KEYER JACK [ELEC-KEY]
Plug in a bug or paddle type key to use the internal
electronic keyer for CW operation. (p. 22)
•SetthekeyertypetoELEC-KEY,BUGKEYorStraight
key in the “Keyer Type” item of the Keyer Set mode.
•Whenastraightkeyisconnected,“Straightkey”must
be selected in the “Keyer Type” item of the Keyer Set
mode. (p. 55)
•Astraightkeyjackislocatedontherear panel.See
[KEY]onpages11and22.
•You can reverse the keyer paddle polarity (dot and
dash) in
the “Paddle Polarity” item
of
the Keyer Set mode.
(p. 55)
•Fourkeyermemorychannelsareavailableforyourcon-
venience. (p. 51)
(dot)
(com)
(dash)
u MICROPHONE CONNECTOR [MIC]
Plug in the supplied or an optional microphone.
•Seepage199forappropriatemicrophones.
•Seepage30formicrophoneconnectorinformation.
i MAIN BAND TX/RX INDICATOR
Lights green when the squelch opens, or a signal
isreceivedontheMAINBand;lightsredduring
transmit.
➥ Blinks green when an off-frequency signal is re-
ceived, depending on the “FM/DV Center Error”
option in the Set mode. (p. 162)
Front panel
t
i !0
y
q
e
r
u
o
!2
!1
w
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-9100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-9100 in the language / languages: English as an attachment in your email.

The manual is 43,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info