Manual Icom IC-7800 (page 195 of 206) (English)

12376

195

Zoom out

Zoom in

1/206

16-2

■ General

The IC-7800’s firmware can be updated if desired.

By updating the firmware, new function(s) can be

added and the improvement of performance parame-

ters can be made.

2 ways of firmware update are available; one is using

the CF memory card, and the other is using a PC.

You can choose either way according to your PC con-

dition.

• When only one PC that is connected to internet is

available

➥ Refer to ■ Preparation (p. 16-3) and ■ Firmware

update— CF memory card (p. 16-4)

• When two or more PCs that are connected to inter-

net are available and they are connected to the LAN

(Local Area Network)

➥ Refer to ■ Preparation (p. 16-3) and either

■ Firmware update— PC (p. 16-6) or

■ Firmware update— CF memory card (p. 16-4)

Ask your dealer or distributor about how to update the

firmware if you have no PC.

■ Caution

R CAUTION!: NEVER turn the transceiver power OFF

while updating the firmware.

You can turn the transceiver power OFF only when the

transceiver displays that rebooting is required.

If you turn the transceiver power OFF, or if a power fail-

ure occurs during updating, the transceiver firmware

will be damaged and you have to send the transceiver

back to the nearest Icom distributor for repair. This type

of repair is out of warranty even if the warranty period

is still valid.

Recommendation!

Backing up the settings and/or memory contents to the

CF memory card before starting the firmware update

is recommended.

Settings and/or memory contents will be lost when the

firmware update is performed.

A memory card reader is required to copy the down-

loaded firmware file.

An Ethernet card/board (10 BASE-T/100 BASE TX

compatible) is required when updating the firmware

from the PC.

Both memory card reader and Ethernet card/board

are not supplied from Icom.

Ask your PC dealer about a memory card reader

and an Ethernet card/board for details.

UPDATING THE FIRMWARE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7800 in the language / languages: English as an attachment in your email.

The manual is 26,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-7800 Manual

Product: