Manual Icom IC-7800 (page 19 of 206) (English)

12376

Zoom out

Zoom in

1/206

1-9

^6 NOTCH SWITCH [NOTCH] (for SUB band; p. 5-19)

NOTCH SWITCH [NOTCH] (for MAIN band; p. 5-19)

➥ Switches the notch function between auto, man-

ual and OFF in SSB and AM modes.

➥ Turns the manual notch function ON and OFF

when pushed in CW, RTTY and PSK31 mode.

➥ Turns the auto notch function ON and OFF when

pushed in FM mode.

• “ ” appears when auto notch is in use.

• “ ” appears when manual notch is in use.

➥ Switches the manual notch characteristics from

wide, middle and narrow when pushed for 1 sec.

✔

What is the notch function?

The notch function eliminates unwanted CW or AM carrier

tones while preserving the desired voice signal. The DSP cir-

cuit automatically adjusts the filtering frequency to effectively

eliminate unwanted tones.

^8 DUALWATCH SWITCH [DUALWATCH] (p. 5-16)

➥ Turns the dualwatch function ON and OFF when

pushed.

➥ Turns the dualwatch function ON and equalizes

the main/sub readout frequency to the sub/main

readout when pushed for 1 sec.

(Quick dualwatch

function)

• The quick dualwatch function can be turned OFF

using set mode. (p. 12-14)

^9 SPLIT SWITCH [SPLIT] (p. 6-6)

➥ Turns the split function ON and OFF when

pushed.

➥ Turns the split function ON. When pushed for

1 sec. in non-FM modes, equalizes the sub read-

out frequency to the main readout and sets the

sub readout for frequency input. (Quick split func-

tion)

• The offset frequency is shifted from the main readout

frequency in FM mode. (p. 12-15)

• The quick split function can be turned OFF using set

mode. (p. 12-15)

➥ Turns the split function ON and shifts the sub

readout frequency after inputting an offset.

&0 MAIN BAND ACCESS SWITCH [MAIN]

Selects the main readout.

• The main readout frequency is clearly displayed. The

sub readout functions only during split operation or du-

alwatch.

&1 MAIN/SUB EQUALIZING SWITCH [M=S]

Equalizes the sub readout frequency to the main

readout frequency when pushed for 1 sec.

&2 AUTOMATIC TUNING SWITCH [AUTO TUNE]

(for MAIN band)

&3 AUTOMATIC TUNING SWITCH [AUTO TUNE]

(for SUB band)

Turns the automatic tuning function ON and OFF in

CW and AM modes.

&4 MAIN DIAL

Changes the displayed frequency (main band), se-

lects set mode setting, etc.

&5 MAIN/SUB CHANGE SWITCH [CHANGE]

Switches the frequency and selected memory

channel between main and sub readouts when

pushed.

• Switches between transmit frequency and receive fre-

quency when the split frequency function is ON. (p. 6-6)

&6 LOCK SWITCH [LOCK] (for MAIN band; p. 5-18)

&7 LOCK SWITCH [LOCK] (for SUB band; p. 5-18)

Push to switch the dial lock function ON and OFF.

&8 SUB BAND ACCESS SWITCH [SUB]

Selects the sub readout.

• The sub readout frequency is clearly displayed. The

main readout functions only during split operation or du-

alwatch.

&9 SUB DIAL

Changes the displayed frequency in sub band.

IMPORTANT!

When receiving a weak signal, or receiving a sig-

nal with interference, the automatic tuning func-

tion may tune the receiver to an undesired signal.

PANEL DESCRIPTION

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7800 in the language / languages: English as an attachment in your email.

The manual is 26,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-7800 Manual

Product: