670155
225
Zoom out
Zoom in
Previous page
1/232
Next page
16-7
D IP address setting When updating the firmware from the USB flash
drive, the following settings are not necessary.
IMPORTANT!Afixed(static)IPaddressisusedfor
the IC-7700.
When you connect the IC-7700 to a LAN, ask the
network manager about a usable/assignable IP
address and the subnet mask in advance.
NEVER use an IP address that has already been
used with another device in the network. If the IP
address is duplicated, the network will crash.
q Push EXIT/SET several times to close a multi-func-
tion screen, if necessary.
w Push [SET] F-7 to select set mode menu screen.
e Push [OTHERS] F-5 to select Others set mode.
r Push [Y] F-1 or [Z] F-2 several times to select
“IP Address” item.
t Push [t u] F-3 to select the desired part then
rotate the main dial to set the desired or specified
IP address.
•“192.168.0.10”isthedefaultsetting.
y Push [Z] F-2 to select “Subnet Mask” item.
u Rotate the main dial to set the desired or specified
subnet mask.
•“255.255.255.0”isthedefaultsetting.
i Push POWER to turn the transceiver power OFF,
then ON to enable the IP address and subnet
mask settings.
F-2 F-3F-1
Ω ≈
F-5
OTHERS EXIT/SET
F-7
SET
16
UPDATING THE FIRMWARE
225


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7700 in the language / languages: English as an attachment in your email.

The manual is 23,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info