670162
87
Zoom out
Zoom in
Previous page
1/180
Next page
• Scanning during dualwatch
Scanning operates only for the main readout. To
operate the scan during dualwatch, scan on the main
readout and use the sub readout for your QSO using
both dualwatch and split frequency operation.
q Program the desired programmed scan edges in
the same amateur band. See p. 101 for program-
ming.
If you plan to operate a F scan, programming the
scan edges may not be necessary.
w Push [SPLIT] to turn the split frequency function
ON.
• “ ” appears.
e Select VFO mode for the main readout.
r Set the desired operating frequency for the main
readout.
t Push and hold [DUALWATCH] for 1 sec.
• “ ” appears.
Equalized receive frequency and operating mode
appear on the sub band readout and the dualwatch
funct
ion is turned ON.
y Push [SCAN] (F-5) to select the scan screen.
Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
u Push [PROG] (F-1) or [F] (F-2) to start the pro-
grammed scan or F scan, respectively.
Scan activates on the main readout between the pro-
grammed scan edges or within the F span.
• Transm
itting on the sub readout stops the scan.
i To cancel the scan, push [EXIT/SET].
F-1
F-2 F-5
EXIT/SET
DUAL
WATCH
SPLIT
PROG SCAN
F
80
4
RECEIVE AND TRANSMIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7600 in the language / languages: English as an attachment in your email.

The manual is 14,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info