670162
75
Zoom out
Zoom in
Previous page
1/180
Next page
Scope during Tx (CENTER Type) ON
Turn display of the transmit signal ON and OFF.
NOTE: Transmit signal display is available for the
center mode only.
Max Hold ON
Turn the peak level hold function ON and OFF.
CENTER Type Display Filter Center
Select the center frequency of the spectrum scope
indication (center mode only).
Filter Center : Shows the selected filter’s center
frequency at the center.
Carrier Point Center
: Shows the selected operating mode
carrier point frequency at the center.
Carrier Point Center (Abs. Freq.)
: In addition to the carrier point center
setting above, the actual frequency
is displayed for the bottom of the
scope.
Waveform Color (Current)
217 241 247
Set the waveform color for the currently received
signals.
The color is set in RGB format.
Push [ ] (F-3) to select R (Red), G (Green) and
B (Blue), and rotate the ratio from 0 to 255 range.
The set color is indicated in the box beside the
RGB scale.
Waveform Color (Max Hold)
58 110 147
Set the waveform color for the received signals max-
imum level.
The color is set in RGB format.
Push [ ] (F-3) to select R (Red), G (Green) and
B (Blue), and rotate the ratio from 0 to 255 range.
The set color is indicated in the box beside the
RGB scale.
Sweep Speed (± 2.5k) MID
Select the sweep speed for the ±2.5 kHz span selec-
tion from SLOW, MID and FAST.
NOTE: Signals may be displayed incorrectly with
“FAST” setting.
Sweep Speed (± 5k) MID
Select the sweep speed for the ±5 kHz span selec-
tion from SLOW, MID and FAST.
NOTE: Signals may be displayed incorrectly with
“FAST” setting.
Sweep Speed (± 10k) FAST
Select the sweep speed for the ±10 kHz span selec-
tion from SLOW, MID and FAST.
Continues to the next page.
68
4
RECEIVE AND TRANSMIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7600 in the language / languages: English as an attachment in your email.

The manual is 14,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info