670162
55
Zoom out
Zoom in
Previous page
1/180
Next page
D Functions for the RTTY decoder indication
q Push a band key to select the desired band.
w Push [RTTY/PSK] to select RTTY.
After RTTY mode is selected, push and hold [RTTY/
PSK] for 1 sec. to toggle between RTTY and RTTY-R
modes.
“RTTY” or “RTTY-R” appears.
e Push [DECODE] (F-3) to display the decode
screen.
When tuned into an RTTY signal, decoded characters
are displayed in the RX contents screen.
r Push [HOLD/CLR] (F-2) to freeze the current
screen.
” appears while the function is in use.
Push [HOLD/CLR] (F-2)
again to cancel the function.
t Push and hold [HOLD/CLR] (F-2) for 1 sec. to
clear the displayed characters.
indicator disappears at the same time when
the hold function is in use.
y Push [WIDE] (F-6) to toggle the RTTY decode
screen size from normal and wide.
S/RF meter type during wide screen indication can be
selected in display set mode. (p. 129)
u Push [EXIT/SET] to close the RTTY decode
screen.
D Setting the decoder threshold level
Adjust the RTTY decoder threshold level if some
characters are displayed when no signal is received.
q Select the RTTY decode screen as described
above.
w Push [ADJ] (F-4) to select the threshold level set-
ting condition.
e Rotate the main dial to adjust the RTTY decoder
threshold level.
Push and hold [DEF] (F-5) for 1 sec. to select the
default setting.
r Push [ADJ] (F-4) to exit from the threshold level
setting condition.
The UnShift On Space (USOS) function and new
line code can be set in the RTTY set mode.
(p. 51)
EXIT/SET
F-3 F-6
Band keys
F-2
RTTY/PSK
DECODE
HOLD/CLR
WIDE
RTTY Decode screen (Normal)
RTTY Decode screen (Wide)
Main dial
F-4 F-5
DEFADJ
Threshold level indication bar
48
4
RECEIVE AND TRANSMIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7600 in the language / languages: English as an attachment in your email.

The manual is 14,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info