670162
43
Zoom out
Zoom in
Previous page
1/180
Next page
Basic transmit operation
Before transmitting, monitor your selected
operating frequency to make sure transmitting
won’t cause interference to other stations on
the same frequency. It’s good amateur practice
to listen first, and then, even if nothing is heard,
ask “Is the frequency in use?once or twice,
before you begin operating on that frequency.
D Transmitting
Before transmitting, monitor your selected operat-
ing frequency to make sure transmitting won’t cause
interference to other stations on the same frequency.
q Push [TRANSMIT] or [PTT] (microphone) to trans-
mit.
The [TX] indicator lights red.
” appears while transmitting.
w Push [TRANSMIT] again or release [PTT] (micro-
phone) to return to receive.
Adjusting the transmit output power
Rotate [RF POWER].
Adjustable range : 2 W to 100 W
(AM mode: 1 W to 30 W)
Increases
max. 100 W
(30 W for AM)
Decreases
min. 2 W
(1 W for AM)
Push
D Microphone gain adjustment
Before transmitting, monitor your selected operat-
ing frequency to make sure transmitting won’t cause
interference to other stations on the same frequency.
q Push [SSB] to select SSB mode.
w Push [METER] (MF2) to select the ALC meter.
e Push [PTT] (microphone) to transmit.
Talk into the microphone at your normal voice level.
r While talking into the microphone, rotate
[MIC GAIN] so that the ALC meter reading doesn’t
go outside the ALC zone. (see at right)
MIC GAIN
Recommended level for
an Icom microphone
Increases
Decreases
Push
t Release [PTT] (microphone) to return to receive.
In addition, the transceiver can display the multi-func-
tion digital meter in the LCD, which displays all trans-
mit meters simultaneously.
[RF POWER]
TRANSMIT
[TX] indicator
[MIC GAIN]
METER
SSB
ALC zone
36
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7600 in the language / languages: English as an attachment in your email.

The manual is 14,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info