670162
36
Zoom out
Zoom in
Previous page
1/180
Next page
D About 5 MHz band operation (USA version only)
Operation on the 5 MHz band is allowed on 5 discrete
frequencies and must adhere to the following:
USB mode
Maximum of 50 watts ERP (Effective Radiated Power)
2.8 kHz bandwidth
It’s your responsibility to set all controls so that trans-
mis
sion in this band meets the stringent conditions
under which amateur operations may use these fre-
quencies.
NOTE: We recommend that you store these fre-
quencies, mode and filter settings into memory
channels for easy recall.
* The FCC specifies center frequencies on the
5 MHz band. However, the IC-7600 displays car-
rier frequency. Therefore, tune the transceiver to
1.5 kHz below the specified FCC channel center
frequency.
D Quick tuning step
The operating frequency can be changed in larger
steps (0.1, 1, 5, 9, 10, 12.5, 20 or 25 kHz selectable)
for quick tuning.
q Push [TS] to turn the qu
ick tuning function ON.
Z” appears when the quick tuning function is ON.
w Rotate the main dial to change the frequency in
programmed kHz steps.
e Push [TS] again to turn the quick tuning function
OFF.
Z” disappears.
r Rotate the main dial for normal tuning if desired.
D Selecting “kHz” step
q Push [TS] to turn the quick tuning function ON.
Z” appears when the quick tuning function ON.
w Push and hold [TS] for 1 sec. to enter quick tuning
step set mode.
Selected tuning steps for all modes appear.
e Select the desired operating mode.
r Rotate the main dial to select the desired tuning
step.
Push and hold [DEF] (F-4) for 1 sec. to return to the
default setting, if desired.
t Repeat steps e and r to select quick tuning steps
for other modes, if desired.
y Push [EXIT/SET] to exit the setting display.
NOTE: When entering quick tuning step set mode,
the quick tuning function must be activated first.
IC-7600 Displayed
Frequency*
FCC Channel
Center Frequency*
5.33050 MHz 5.33200 MHz
5.34650 MHz 5.34800 MHz
5.36650 MHz 5.36800 MHz
5.37150 MHz 5.37300 MHz
5.40350 MHz 5.40500 MHz
To assist you in operating the 5 MHz band within
the rules specified by the FCC, transmission is
illegal on any 5 MHz band frequency other than the
five frequencies indicated in the table above.
Main dial
TS
Main dial
TS
Mode selection
F-4
EXIT/SET
DEF
Quick tuning indicator
29
3
BASIC OPERATION
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7600 in the language / languages: English as an attachment in your email.

The manual is 14,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info