670162
13
Zoom out
Zoom in
Previous page
1/180
Next page
@1 MODE SWITCHES
Selects the desired mode. (p. 32)
Announces the selected mode via the speech synthe-
sizer. (p. 35)
[SSB]
Selects USB and LSB modes alternately when
pushed.
Selects SSB data mode (USB-D, LSB-D) when
pushed and held for 1 sec. in SSB mode.
In SSB data mode, push to return to SSB mode.
 ➥ Switches D1, D2 and D3 when pushed and held
for 1 sec. in SSB data mode.
[CW]
Selects CW and CW-R (CW reverse) modes alter-
nately when pushed.
[RTTY/PSK]
Selects RTTY and PSK modes alternately when
pushed.
 ➥ Switches RTTY and RTTY-R (RTTY reverse)
mode when pushed and held for 1 sec. in RTTY
mode.
 ➥ Switches PSK and PSK-R (PSK reverse) mode
when pushed and held for 1 sec. in PSK mode.
[AM/FM]
Selects AM and FM modes alter
nately.
Selects AM or FM data mode (AM-D/FM-D)
when pushed and held for 1 sec. in AM or FM
mode, respectively.
In AM or FM data mode, push to return to AM or
FM mode, respectively.
 ➥ Switches D1, D2 and D3 when pushed and held
for 1 sec. in AM or FM data mode.
@2 FIL
TER SWITCH [FILTER] (p. 76)
Push to select one of 3 IF filter settings.
Push and hold for 1 sec. to display the filter set
screen.
@3 EXIT/SET SWITCH [EXIT/SET]
Push to exit, or return to the previous screen in-
dication during spectrum scope, memory, scan
or set mode screen display.
Push and hold for 1 sec. to display the set mode
menu screen.
@4
VOICE MEMORY RECORD SWITCH [REC]
(p. 91)
Push to record the previous received signal for
the preset time period.
The preset time period can be set in voice set mode.
(p. 97)
Push and hold for 1 sec. to record the received
signal until the recording is cancelled.
Push this switch momentarily to stop recording.
• The memory records the latest 30 sec. of audio.
@5 VOICE MEMORY PLAYBACK SWITCH [PLAY]
(p. 92)
Push to playback the previously recorded audio
for the preset time period.
Push and hold for 1 sec. to playback all of the
previously recorded audio.
@6
AUTOMATIC TUNING SWITCH [AUTO TUNE]
(p. 83)
Turns the automatic tuning function ON and OFF in
CW and AM modes.
IMPORTANT!
When receiving a weak signal, or receiving a sig-
nal with interference, the automatic tuning func-
tion may tune the receiver to an undesired signal.
@7 MAIN DIAL
Changes the displayed frequency, selects set
mode setting, etc.
@8 SPEECH/LOCK SWITCH [SPEECH/LOCK]
Push to announce the S-meter indication, the
displayed frequency and the operating mode.
(p. 35)
The parameters to be announced can be selected in
the others set mode. (p. 131)
Push and hold for 1 sec. to turn the dial lock
function ON and OFF. (p. 82)
The dial lock function electronically locks the main
dial.
The lock indicator lights while the dial lock function
is activated.
NOTE: The [SPEECH/LOCK] switch operation
to activate the voice synthesizer or the dial lock
functions can be replaced in others set mode.
(p. 131)
@9 RIT/TX CONTROL [RIT/TX] (pgs. 73, 87)
Shifts the receive and/or transmit frequency with-
out changing the transmit and/or receive frequency
shown on the main VFO while the RIT and/or TX
functions are/is ON.
Rotate the control clockwise to increase the frequency,
or rotate the control counterclockwise to decrease the
frequency. The RIT or TX funct
ions must be ON.
The shift frequency range is ±9.999 kHz in 1 Hz steps
(or ±9.99 kHz in 10 Hz steps).
Low shift
High shift
6
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7600 in the language / languages: English as an attachment in your email.

The manual is 14,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info