8
1
PANEL DESCRIPTION
$6 KEYPAD
➥ Pushing a key selects the operating band.
•[(GENE)•] selects the general coverage band.
➥ Pushing the same key 2 or 3 times calls up other
stacked frequencies in the band. (p. 24)
•Icom’s triple band stacking register memorizes 3 fre-
quencies in each band.
➥ After pushing [(F-INP)ENT], enters a keyed fre-
quency or memory channel. Pushing [(F-
INP)ENT] or [
YY
]/[
ZZ
] is necessary at the end.
(pgs. 25, 77)
•e.g. to enter 14.195 MHz, push [(F-INP)ENT] [1] [4]
[•] [1] [9] [5] [(F-INP)ENT].
$7 MEMO PAD-WRITE SWITCH [MP-W] (p. 82)
Programs the selected readout frequency and op-
erating mode into a memo pad.
•The 5 most recent entries remain in memo pads.
•The transmit frequency is programmed when pushed to-
gether with [XFC].
•The memo pad capacity can be expanded from 5 to 10
in set mode for your convenience. (p. 102)
$8 SPLIT SWITCH [SPLIT] (p. 71)
➥ Turns the split function ON and OFF when
pushed.
➥ Turns the split function ON, equalizes the sub
readout frequency to the main readout and sets
the sub readout for frequency input when pushed
for 1 sec. in non-FM modes.
(Quick split function)
•The offset frequency is shifted from the main readout
frequency in FM mode. (pgs. 52, 100)
•The quick split function can be turned OFF using set
mode. (p. 100)
➥ Turns the split function ON and shifts the sub
readout frequency after input an offset (±4 MHz
in 1 kHz steps).
$9 DUALWATCH SWITCH [DUALWATCH] (p. 63)
➥ Turns the dualwatch function ON and OFF when
pushed.
➥ Turns the dualwatch function ON and equalizes
the sub readout frequency to the main readout
when pushed for 1 sec. (Quick dualwatch function)
•The quick dualwatch function can be turned OFF
using set mode. (p. 98)
%0 MAIN/SUB CHANGE SWITCH [CHANGE]
➥ Switches the frequency and selected memory
channel between main and sub readouts when
pushed.
•Switches between transmit frequency and receive fre-
quency when the split frequency function is ON.
(p. 71)
➥ Equalizes the sub readout frequency to the main
readout frequency when pushed for 1 sec.
%1 VFO/MEMORY SWITCH [VFO/MEMO]
➥ Switches the selected readout operating mode
between the VFO mode and memory mode when
pushed. (pgs. 23, 77)
➥ Transfers the memory contents to VFO when
pushed for 1 sec. (p. 80)
%2 MAIN/SUB•M.SCOPE SWITCH
[MAIN/SUB•M.SCOPE]
➥ Push momentarily to select access to the main or
sub readout. (p. 23)
•The sub readout frequency is displayed in outline or
mesh font. The sub readout functions only during split
operation or dualwatch.
➥ Push for 1 sec. to turn the mini spectrum scope
screen indication ON and OFF. (p. 55)
•The mini spectrum scope screen can be indicated
with another screen, such as memory, set mode
screen, simultaneously.
%3 LCD FUNCTION DISPLAY (See p. 9 for details.)
Shows the operating frequency, function switch
menus, spectrum scope screen, memory channel
screen, set mode settings, etc.
1
