7
1
PANEL DESCRIPTION
■ Front panel (continued)
#7 RECEIVE INDICATOR [RX]
Lights green while receiving a signal and when the
squelch is open.
#8 TRANSMIT INDICATOR [TX]
Lights red while transmitting.
#9 LOCK INDICATOR [LOCK] (p. 65)
Lights red when the dial lock function is activated.
$0 TRANSMIT FREQUENCY CHECK SWITCH
[XFC]
Monitors the transmit frequency when pushed and
held during the split frequency operation.
•While pushing this switch, the transmit frequency can be
changed with the tuning dial, keypad, memo pad or the
[
YY
]/[
ZZ
] switches.
•When the split lock function is turned ON, pushing [XFC]
cancels the dial lock function. (p. 100)
$1 QUICK TUNING SWITCH [TS] (p. 26)
➥ Turns the quick tuning step ON and OFF.
•While the quick tuning indicator, “Z,” is displayed
above the frequency indication, the frequency can be
changed in programmed kHz steps.
•0.1, 1, 5, 9, 10, 12.5, 20 and 25 kHz quick tuning
steps are available for each operating mode indepen-
dently.
➥ When the quick tuning step is OFF, push for 1
sec. to turn the 1 Hz tuning step ON and OFF.
•1 Hz indications appear in both readouts and the fre-
quency can be changed in 1 Hz steps.
➥ When the quick tuning step is ON, push for 1 sec.
to enter the quick tuning step set mode.
$2 MEMORY CLEAR SWITCH [M-CL] (p. 81)
Clears the selected readout memory channel con-
tents when pushed for 1 sec. in memory mode.
•The channel becomes a blank channel.
•This switch does not function in VFO mode.
$3 MEMORY WRITE SWITCH [MW] (p. 79)
Stores the selected readout frequency and operat-
ing mode into the displayed memory channel when
pushed for 1 sec.
•This function is available both in VFO and memory
modes.
$4 MEMORY UP/DOWN SWITCHES [
YY
]/[
ZZ
] (p. 77)
➥ Push to select the memory channel number for
the selected readout.
•Memory channels can be selected both in VFO and
memory modes.
➥ Select the desired memory channel directly after
pushing [(F-INP)ENT] and a memory channel
number.
$5 MEMO PAD-READ SWITCH [MP-R] (p. 82)
Each pushing calls up a frequency and operating
mode in a memo pad. The 5 (or 10) most recently
programmed frequencies and operating modes can
be recalled, starting from the most recent.
•The memo pad capacity can be expanded from 5 to 10
in set mode for your convenience. (p. 102)
