12362
81
Zoom out
Zoom in
Previous page
1/88
Next page
13
79
CONTROL COMMAND
CI-V connection example
The transceiver can be connected through an optional
CT-17 CI-V LEVEL CONVERTER to a personal computer
equipped with an RS-232C port. The Icom Communi-
cations Interface-V (CI-V) controls the following func-
tions of the transceiver.
Up to 4 Icom CI-V transceivers or transceivers can be
connected to a personal computer equipped with an
RS-232C port. See p. 73 for setting the CI-V condition
using set mode.
Data format
The CI-V system can be operated using the following
data formats. Data formats differ according to com-
mand numbers. A data area or sub command is added
for some commands.
Controller to IC-756PROII
FE FE 64 E0 Cn Sc Data area FD
Preamble
code (fixed)
Transceivers
default address
Controllers
default address
Command number
(see the command table)
Sub command number
(see command table)
BCD code data for
frequency or memory
number entry
End of message
code (fixed)
OK message to controller
FE FE E0 64 FB FD
FE FE E0 64 FA FD
Preamble
code (fixed)
Controllers
default address
Transceivers
default address
OK code
(fixed)
End of message
code (fixed)
NG message to controller
NG code
(fixed)
IC-756PROII to controller
qwert y u
FE FE E0 64 Cn Sc Data area FD
qwert y u
Remote jack (CI-V) information
915 V
DC
personal
computer
ct- 17
BC-25
(optional)
IC-756PROII
mini-plug cable
Command table
Command Sub command Description
00 Send frequency data
01 Same as Send mode data
command 06
02 Read band edge frequencies
03 Read operating frequency
04 Read operating mode
05 Set frequency data
06 00 Select LSB
01 Select USB
02 Select AM
03 Select CW
04 Select RTTY
05 Select FM
07 Select CW-R
08 Select RTTY-R
07 Select VFO mode
B0 Exchange main and sub readouts
B1 Equalize main and sub readouts
C0 Turn the dualwatch OFF
Command Sub command Description
07 C1 Turn the dualwatch ON
D0 Select main readout
D1 Select sub readout
08 Select memory mode
00010101*
1
Select memory channel
*
1
P1=0100, P2=0101
09 Memory write
0A Memory to VFO
0B Memory clear
0E 00 Scan stop
01 Programmed/memory scan start
02 Programmed scan start
03 F scan start
12 Fine programmed scan start
13 Fine F scan start
22 Memory scan start
23 Select memory scan start
IC-756PROII.qxd 02.1.8 15:52 Page 79
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-756PROII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-756PROII in the language / languages: English as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info