Manual Icom IC-756PRO (page 81 of 84) (English)

12360

Zoom out

Zoom in

1/84

CONTROL COMMAND

•Command table

Sub commandCommand Description

—00 Send frequency data

Same as

command 06

Send mode data

—02 Read band edge frequencies

—

03 Read operating frequency

04 Read operating mode

—05 Set frequency data

Set LSB

Set USB

Set AM

Set CW

Set RTTY

Set FM

Set CW-R

Set RTTY-R

—

Select VFO mode

Exchange main and sub readouts

Equalize main and sub readouts

Turn the dualwatch OFF

Turn the dualwatch ON

Select main readout

Select sub readout

0001 – 0101*

Select memory mode

Select memory channel

P1=0100, P2=0101

—09 Memory write

—0A Memory to VFO

—0B Memory clear

A1 – A7

Scan stop

Programmed/memory scan start

Programmed scan start

∂F scan start

Fine programmed scan start

Fine ∂F scan start

Memory scan start

Select memory scan start

Set ∂F scan span

(5 kHz, A2=±10 kHz, A3=±20

kHz, A4=±50 kHz, A5=±100 kHz,

A6=±500 kHz, A7=±1 MHz)

Set as non-select channel

Set as select channel

Set scan resume OFF

Set scan resume ON

10 Hz (1 Hz) tuning step

100 Hz tuning step

1 kHz tuning step

5 kHz tuning step

9 kHz tuning step

10 kHz tuning step

12.5 kHz tuning step

20 kHz tuning step

25 kHz tuning step

Sub commandCommand Description

01 + level data

[CW PITCH] setting (0=low pitch

to 255=high pitch)

Read squelch condition

Read S-meter level

Set preamp (0=OFF; 1=preamp 1;

2=preamp 2)

Set AGC time constant (1=FAST;

2=MID; 3=SLOW)

Set noise blanker (0=OFF; 1=ON)

Set noise reduction

(0=OFF; 1=ON)

Set auto notch (0=OFF; 1=ON)

Send/read memory contents

Send/read band stacking register

contents

Send/read CW keyer contents

[AF] level setting (0=max. CCW

to 255=max. CW)

[RF] level setting (0=max. CCW

to 255=11 o’clock)

[SQL] level setting (0=11 o’clock

to 255=max. CW)

[NR] level setting (0=min. to

255=max.)

Inside [TWIN PBT] setting or

IF shift setting (0=max. CCW,

128=center, 255=max. CW)

Outside [TWIN PBT] setting

(0=max. CCW, 128=center,

255=max. CW)

09 + level data

08 + level data

07 + level data

06 + level data

03 + level data

02 + level data

Turn the split function OFF

Turn the split function ON

48 Set manual notch (0=OFF; 1=ON)

49 Set RTTY filter notch

(0=OFF; 1=ON)

42 Set repeater tone (0=OFF; 1=ON)

43 Set tone squelch (0=OFF; 1=ON)

44 Set speech compressor

(0=OFF; 1=ON)

45 Set monitor (0=OFF; 1=ON)

46 Set VOX function (0=OFF; 1=ON)

47 Set break-in (0=OFF; 1=ON)

19 Read the transceiver ID00

Set repeater tone frequency

Set tone squelch tone frequency

Set the transceiver to receive or

transmit condition (0=Rx; 1=Tx)

[RF POWER] setting (0=min. to

255=max.)

0A + level data

[MIC GAIN] setting (0=min. to

255=max.)

0B + level data

[KEY SPEED] setting (0=slow to

255=fast)

0C + level data

[NOTCH] setting (0=low freq. to

255=high freq.)

0D + level data

[COMP] setting (0=min. to

255=max.)

0E + level data

[BK-IN DELAY] setting (0=short

delay to 255=long delay)

0F + level data

[BAL] setting (0=max. CCW,

128=center, 255=max. CW)

10 + level data

Attenuator OFF

Attenuator ON (6 dB)

Attenuator ON (12 dB)

Attenuator ON (18 dB)

Select [ANT1]

Select [ANT2]

(Add 0 or 1 to turn [RX ANT] OFF

or ON, respectively.)

Announce with voice synthesizer

(00=all data; 01=frequency and

S-meter level; 02=receive mode)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-756PRO in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-756PRO Manual

Product: