12358

Icom IC-756 Manual

109
Zoom out
Zoom in
Previous page
1/124
Next page
104
12
SET MODE
■
Miscellaneous (others) set mode (continued)
EExxtteerrnnaall KKeeyyppaadd
This item sets the external keypad capability and
function.
For your information
The following diagram shows the equivalent circuit of
an external keypad and connects to the pin 3 and
pin 7 of the [MIC] connector (p. 18).
AAuuttoo
Pushing one of external keypad
switches, transmits the desired voice
memory during a phone mode (SSB,
AM or FM), or memory keyer contents
during CW mode operation.
VVOOIICCEE PPLLAAYY((TTXX))
Pushing one of external keypad
switches, transmits the desired voice
memory contents during a phone
mode operation.
KKEEYYEERR SSEENNDD
Pushing one of external keypad
switches, transmits the desired keyer
memory contents during CW mode
operation.
OOFFFF
External keypad does not function.
(default)
To [MIC] connector pin e
To [MIC] connector pin u
1.5kΩ
±
5%
1.5kΩ
±
5%
2.2kΩ
±
5%
4.7kΩ
±
5%
S1
(T1/M1)
S2
(T2/M2)
S3
(T3/M3)
S4
(T4/M4)
USER EXTERNAL KEYPAD
CCII--VV BBaauudd RRaattee
This item sets the data transfer rate. 300, 1200, 4800,
9600, 19200 bps and “Auto” are available.
When “Auto” is selected, the baud rate is automati-
cally set according to the connected controller or re-
mote controller.
AAuuttoo
Auto baud rate
(default)
1199220000
19200 bps
CCII--VV AAddddrreessss
To distinguish equipment, each CI-V transceiver has
its own Icom standard address in hexadecimal code.
The IC-756PROIII’s address is 6Eh.
When 2 or more IC-756PROIII’s are connected to an
optional CT-17
CI
-
V LEVEL CONVERTER
, rotate the tun-
ing dial to select a different address for each IC-
756PROIII in the range 01h to 7Fh.
66EEhh
Address of 6Eh
(default)
77FFhh
Address of 7Fh
CCII--VV TTrraannsscceeiivvee
Transceive operation is possible with the
IC-756PROIII
connected to other Icom HF transceivers or receivers.
When “ON” is selected, changing the frequency, op-
erating mode, etc. on the IC-756PROIII automatically
changes those of connected transceivers (or re-
ceivers) and vice versa.
OONN
Transceive ON
(default)
OOFFFF
Transceive OFF
CCII--VV wwiitthh IICC--773311
When connecting the IC-756PROIII to the IC-735 for
transceive operation, you must change the operating
frequency data length to 4 bytes.
•This item must be set to “ON” only when operating the
transceiver with the IC-735.
OONN
4 bytes of frequency data
OOFFFF
5 bytes of frequency data
(default)
12
… 109 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-756 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-756 in the language / languages: English as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Icom IC-756

Icom IC-756 User Manual - English - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info