670163
146
Zoom out
Zoom in
Previous page
1/173
Next page
16
SPECIFICATIONS
16-3
D Receiver
• Receive system: Direct sampling superheterodyne
• Intermediate frequency: 36 kHz
• Sensitivity (Filter: SOFT):
SSB/CW (BW=2.4 kHz, 10 dB S/N)
1.8 ~ 29.999999 MHz Less than –123 dBm (0.16 μV) (P.AMP1 ON)
50 MHz band Less than –125 dBm (0.13 μV) (P.AMP2 ON)
70 MHz band*
2
Less than –123 dBm (0.16 μV) (P.AMP2 ON)
*
2
Depending on the transceiver version.
AM (BW=6 kHz, 10 dB S/N)
0.5 ~ 1.8 MHz Less than –85 dBm (12.6 μV) (P.AMP1 ON)
1.8 ~ 29.999999 MHz Less than –101 dBm (2.0 μV) (P.AMP1 ON)
50 MHz and 70 MHz bands Less than –107 dBm (1.0 μV) (P.AMP2 ON)
FM (BW=15 kHz, 12 dB SINAD)
28.0 ~ 29.7 MHz Less than –113 dBm (0.5 μV) (P.AMP1 ON)
50 MHz and 70 MHz bands Less than –119 dBm (0.25 μV) (P.AMP2 ON)
• Squelch sensitivity (threshold):
SSB Less than –92 dBm (5.6 μV)
FM Less than –117 dBm (0.3 μV)
(HF band: P.AMP1 ON, 50 MHz band: P.AMP2 ON)
• Selectivity (Filter: SHARP):
SSB (BW=2.4 kHz) More than 2.4 kHz/–6 dB
Less than 3.4 kHz/–40 dB
CW (BW=500 Hz) More than 500 Hz/–6 dB
Less than 700 Hz/–40 dB
RTTY (BW=500 Hz) More than 500 Hz/–6 dB
Less than 800 Hz/–40 dB
AM (BW=6 kHz) More than 6.0 kHz/–6 dB
Less than 10 kHz/–40 dB
FM (BW=15 kHz) More than 12.0 kHz/–6 dB
Less than 22 kHz/–40 dB
• Spurious and image rejection: More than 70 dB (except for ADC aliasing)
Audio output power: More than 2.5 W (8 Ω load, 1 kHz, 10% distortion)
AF output impedance: 8 Ω
• RIT variable range: ±9.999 kHz
D Antenna tuner
Tunable impedance range: 16.7~150 Ω (unbalanced) (less than 3:1 VSWR)
• Tuning accuracy: Less than 1.5:1 VSWR
• Tuning time (approximately): 2~3 seconds (average)
15 seconds (maximum)
LAll stated specications are typical and subject to change without notice or obligation.
146


Need help? Post your question in this forum.

Forumrules
1

Forum

icom-ic-7300

Reset search

  • is there available a wiring pictorial chart for the small internal ic-7300 coaxial jumper cables?
    ie: from the RF unit to the PA board? tnx Sam in Alabam KF4TXQ Submitted on 2-1-2022 at 06:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7300 in the language / languages: English as an attachment in your email.

The manual is 24,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info