670163

Icom IC-7300 Manual

142
Zoom out
Zoom in
Previous page
1/173
Next page
15-5
UPDATING THE FIRMWARE
15
Updating the fi rmware
IMPORTANT: To update the  rmware,  rst format
your SD card using the IC-7300. (p. 8-3) Then copy
the downloaded  rmware data from your PC to the
SD card. (p. 8-4)
CAUTION:
NEVER turn OFF the transceiver while
updating the  rmware.
If you turn OFF the transceiver, or if a power failure
occurs while updating, the transceiver  rmware will be
damaged and you will have to send the transceiver
back to the nearest Icom distributor for repair.
This type of repair is out of warranty, even if the
transceiver warranty period is still valid.
TIP: BE SURE to unzip the downloaded  le. See
“Unzipping the  rmware  le (p. 15-4)” for details.
1. Copy the downloaded firmware data into the
IC-7300 folder on an SD card or a USB flash drive.
2. Insert the SD card into the transceiver's
[SD CARD] slot.
3. On the Set mode menu screen, display the
SD CARD screen.
MENU
» SET > SD card
4. Select “Firmware Update.”
• The  rmware update agreement screen is displayed.
5. Touch [Ù] or [Ú] to scroll the screen.
L Carefully read all the displayed precautions.
6. After you read and agree with all the precautions,
touch [YES].
• The  le select screen is displayed.
L When you want to cancel the updating, touch [NO].
7. Touch the Firmware (Example: 7300_101).
• The  nal con rmation screen is displayed.
L Carefully read all the displayed precations.
8. After you read and agree with all the precautions,
touch [YES] for 1 second.
• The updating starts.
L If you want to cancel the updating, touch [NO].
Rotate
Push
Copy
The Firmware Update Agreement screen
… 142 …


Need help? Post your question in this forum.

Forumrules
1

Forum

icom-ic-7300

Reset search

  • is there available a wiring pictorial chart for the small internal ic-7300 coaxial jumper cables?
    ie: from the RF unit to the PA board? tnx Sam in Alabam KF4TXQ Submitted on 2-1-2022 at 06:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7300 in the language / languages: English as an attachment in your email.

The manual is 24,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info