670163

Icom IC-7300 Manual

12
Zoom out
Zoom in
Previous page
1/173
Next page
1
PANEL DESCRIPTION
1-5
Touch screen
q TUNE ICON (p. 11-2)
Appears while tuning the antenna.
w MODE INDICATOR (p. 3-3)
Displays the selected operating mode.
e PASSBAND WIDTH INDICATOR
(p. 4-5)
Graphically displays the passband width for twin
PBT operation and the center frequency for IF shift
operation.
r TONE INDICATOR (p. 4-29)
Displays the selected tone type in the tone
operation mode.
t IF FILTER INDICATOR (p. 4-6)
DisplaystheselectedIFlter.
y QUICK TUNING ICON (p. 3-4)
Appears when the Quick Tuning Step function is
ON.
u IP PLUS ICON (p. 4-7)
Appears when the IP Plus function is ON.
i MEMORY NAME READOUT/AUTO TUNE ICON
Displays the memory name if entered (p. 9-5), or
displays the “AUTOTUNE” icon when the Auto
Tuning function is ON (p. 4-16).
This section describes the icons, screens, dialogs, readouts and so on that are displayed on the IC-7300 screen.
Refer to the pages posted beside each item for details.
o M1~M8/T1~T8/OVF ICON
Displays “M1”~“M8” while “External Keypad” on
the CONNECTORS screen is set to ON and using
the Memory Keyer function (p. 4-18). Displays
“T1”~“T8” while using the Voice TX memory. (p. 7-4)
Displays “OVF” when an excessively strong signal is
received.
!0 VOICE RECORDER ICON (p. 6-2)
Appears while recording.
!1 SD CARD ICON (p. 8-2)
Appears when an SD card is inserted, or blinks
while accessing the SD card.
!2 CLOCK READOUT (p. 12-11)
Displays the current local time.
Touch the readout to display both the current local
time and UTC time.
!3 SPLIT ICON (p. 4-13)
Appears when the Split function is ON.
!4 VFO/MEMORY ICON (p. 3-2)
“VFO A” or “VFO B” appears when the VFO
mode is selected, and “MEMO” appears when the
Memory mode is selected.
!5 MEMORY CHANNEL READOUT (p. 3-2)
Displays the selected memory channel number.
q w e t i o !0 !1 !2
!3
!4
!5
yr u
… 12 …


Need help? Post your question in this forum.

Forumrules
1

Forum

icom-ic-7300

Reset search

  • is there available a wiring pictorial chart for the small internal ic-7300 coaxial jumper cables?
    ie: from the RF unit to the PA board? tnx Sam in Alabam KF4TXQ Submitted on 2-1-2022 at 06:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7300 in the language / languages: English as an attachment in your email.

The manual is 24,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info