12320
4
Zoom out
Zoom in
Previous page
1/64
Next page
Front panel
q POWER SWITCH [PWR]
Push momentarily to turn power ON.
Turn the optional DC power supply ON in advance.
Push for 1 sec. to turn power OFF.
While pushing and holding [SET], push [PWR] to
enter the initial set mode. (p. 41)
w MICROPHONE CONNECTOR [MIC]
Accepts supplied or optional microphone.
See p. 55 for appropriate microphones.
• See p. 8 for microphone connector information.
e HEADPHONE JACK [PHONES] (p. 11)
Accepts headphones (8 ).
When headphones are connected, the internal speaker
or connected external speaker does not function.
r AF CONTROL [AF] (inner control)
Varies the audio output level from the speaker.
t RF GAIN/SQUELCH CONTROL [RF/SQL]
(outer control; pgs. 20, 44)
Adjusts the squelch threshold level. The squelch re-
moves noise output from the speaker (closed con-
dition) when no signal is received.
The squelch is available for all modes.
The control can be set as the squelch plus RF gain con-
trols or squelch control only (RF gain is fixed at maxi-
mum) in initial set mode.
y RIT CONTROLS [RIT] (Inner control; p. 21)
Shifts the receive frequency without changing the
transmit frequency.
Rotate the control clockwise to incerase the frequency,
or rotate the control counterclockwise to decrease the
frequency. “ ” appears on the display.
The shift frequency range is ±1.2 kHz.
u IF SHIFT CONTROLS [SHIFT] (Outer control; p.
21)
Shifts the center frequency of the receivers’s IF
pass-band.
Rotate the control colckwise to shift the center frequency
higher, or rotate the control counterclockwise to shift the
center frequency lower.
i LOCK SWITCH [LOCK] (p. 19)
Push momentarily to turn the dial lock function ON
and OFF.
• The dial lock function electronically locks the main dial.
• When the optional UT-102
VOICE SYNTHESIZER UNIT is
installed (p. 49), push for 1 sec. to have the frequency,
etc. announced.
UT-102 operation can be adjusted in initial set mode
(p. 46).
o MAIN DIAL
Changes the displayed frequency, selects quick/ini-
tial set mode items, etc.
!0 PREAMP SWITCH [P.AMP] (p. 21)
Push momentarily to turn the preamp ON or OFF.
!1 CH SWITCH [CH] (p. 35)
Push momentarily to turn the memory channel se-
lect function ON or OFF.
[MEMO] blinks while memory channel select function is
turned on.
2
2
PANEL DESCRIPTION
MIC
IC-718
PHONES
RF/SQL AF
SHIFT RIT
LOCK
MODE
FIL
TS
PWR
TUNER
COMP
P.AMP
UP
NB
ATT
SET
CH
DN
ENT
F-INP
V/M
1
MW
4
A=B
2
M-CL
5
SCN
8
ANF
0
NR
.
A/B
3
VOX
97
SPL
M V
6
Speaker Function Display
@1
@0
!9 !7
!5
!4
!6
!3
!2
!0
!8
!1
oi
uy
tr
e
w
q
IC-718.qxd 02.9.6 14:28 Page 2
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-718 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-718 in the language / languages: English as an attachment in your email.

The manual is 3,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info