12124
40
Zoom out
Zoom in
Previous page
1/48
Next page
35
8
PROGRAMMABLE FUNCTION KEYS
MONITOR KEY
Activates one of (or two of) the following functions on each
channel independently:
Push and hold the key to unmute the channel (audio is emitted;
Audible condition).
Push the key to toggle between the mute and unmute conditions
(toggles between Audible and Inaudible).
Push the key to mute the channel (sets to Inaudible only).
Push the key to unmute the channel (sets to Audible only).
Push the key after communication is nished to send a reset code.
NOTE: The unmute condition (Audible condition) may
automatically return to the mute condition (Inaudible con-
dition) after a specied period depending on the pre-set-
ting.
WIDE/NARROW KEY (Private bank only)
Push this key to toggle the bandwidth between wide or nar-
row.
DTMF AUTODIAL KEY
Push this key to display the text of the DTMF channel number
and set the desired channel number via the [CH Up]/[CH
Down] key. Then, push this key again to transmit a specied
DTMF code.
RE-DIAL KEY
Push to send the last transmitted DTMF code.
CALL KEY
Push to transmit the 5tone code on the selected channel.
Push and hold to enter the 5tone code channel/number
selection mode. (pgs. 17, 18)
Push [CH Up]/[CH Down] to select the desired channel/ num-
ber.
ID-MR SELECT KEY
Push to recall the received ID code.
Push [CH Up]/[CH Down] to select the record.
HOOK SCAN
Push to turn the hanger action scan function (automatic scan
start when on hook) OFF temporarily, and push again to turn
the function ON.
ATS/S-RING KEY
Push to transmit the Smart-ring signal to the other station.
Push for 1 sec. to turn the ATS function ON and OFF.
CH LOCK KEY
This function electronically locks [CH Up], [CH Down], [Scan
Start/Stop], [MR-CH 1] to [MR-CH 4], [ID MR Select] and
[Hook Scan] keys to prevent accidental channel change.
IC-400PRO.qxd 03.6.19 6:13 PM Page 35 (1,1)
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-400PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-400PRO in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info