74
15
OTHER FUNCTIONS
■ Demonstration display
A demonstration function is available at power ON. This func-
tion gives you a quick visual introduction to the function dis-
play indicators.
q While pushing [CHG/L], push [POWER] to turn power ON.
•The transceiver cycles through a visual tour of the function dis-
play indicators.
w Push any switch to exit demonstration mode and enter the
normal operating condition temporarily.
The transceiver automatically returns to demonstration
mode after 2 min. in which no operations are performed.
To deactivate the demonstration display permanently, turn
power OFF, then while pushing [CHG/L], turn power ON
again.
■ AM/FM narrow mode
FM narrow mode is only available for the Europe version. AM
mode (receive only) is only available for the U.S.A. and S.
America versions. Typically, AM mode is used for the air band
(118–135.995 MHz).
When pushing [PTT], a beep tone sounds indicating the
mode is AM mode. The transceiver cannot transmit in AM
mode.
q Select the mode/channel you wish to set the mode to, such
as VFO mode or memory/call channel.
w Push the desired band’s [
(MAIN)EDIT] for 2 sec. to enter the
edit screen.
•Push [CHG/L] if [(MAIN)EDIT] is not displayed.
e Push [MODE] to set the mode to FM wide/FM narrow or
AM/FM wide.
r If you want to set other channels, rotate the right-hand tun-
ing dial. Repeat e to select the desired frequency.
t Push [ï] to exit the edit screen.
The Europe version of the IC-2800H comply with Euro-
pean regulations regarding narrow FM bandwidth opera-
tion on amateur transceivers. Wide and narrow FM
operation differ in specifications.
■ Fuse replacement
If the fuse blows or the transceiver stops functioning, find the
source of the problem if possible, and replace the damaged
fuse with a new, rated one (FGB 20 A) as shown below.
