12302
67
Zoom out
Zoom in
Previous page
1/96
Next page
50
9
DTMF MEMORY ENCODER
New2001
9
Transmitting a DTMF code
D Automatic transmission (DTMF memory)
qPush [TONEDTMF] for 1 sec. to turn the DTMF memory
encoder ON.
d appears in place of the main bands 100 MHz digit.
wPush [SET ] to enter DTMF memory programming con-
dition.
eRotate main bands [DIAL] to select the desired DTMF
memory channel.
r
Push [PTT] to transmit the selected DTMF memory content.
tPush [TONEDTMF] for 1 sec. to cancel the DTMF en-
coder.
When the DTMF encoder is turned ON continuously, each push
of the PTT transmits the previously selected DTMF code.
z Push [FUNC] then [
LOW
6(DTMF)] to turn the
DTMF memory encoder ON.
d appears in place of the main bands 100 MHz digit.
x Push [
SET
B(D-OFF)] to enter the DTMF memory
programming condition.
c Push [Y] or [Z] to select the desired channel.
v Push [PTT] to transmit the selected memory.
Exit the programming condition automatically.
Each push of [PTT] transmits the DTMF code.
b Push [FUNC] then [
SET
B(D-OFF)] to cancel the
DTMF memory encoder.
When the DTMF encoder is turned ON continuously,
each push of the PTT transmits the previously se-
lected DTMF code.
D Transmitting a DTMF memory directly
z Push [FUNC] then [
LOW
6(DTMF)] to turn the
DTMF memory encoder ON.
d appears in place of the main bands 100 MHz digit.
x
Push [DTMF-S] to turn the DTMF memory di-
rect selection ON.
The function indicator (microphone) lights green.
c Push the desired DTMF channel.
•“0 to 9 and A to D are available for DTMF
memory channels.
The selected DTMF code is automatically transmit-
ted without pushing PTT.
NOTE: When no DTMF code programmed
channel number is pushed, it transmits the rela-
tive DTMF code as the manual transmission de-
scribed in the next page.
v Push [DTMF-S] again to deactivate the DTMF
memory direct selection.
b Push [FUNC] then [
SET
B(D-OFF)] to cancel
the DTMF memory encoder.
DTMF-S
DTMF
IC-2720H_1.qxd 02.12.18 13:02 Page 50 (1,1)
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-2720H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2720H in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info