12296
62
Zoom out
Zoom in
Previous page
1/88
Next page
13
PAGER AND CODE SQUELCH
57
Code channels
D Before programming
The pager and code squelch functions require ID codes and a
group code. These codes are 3-digit DTMF codes and must
be written in the code channels before operation. The trans-
ceiver has separate code channels for each band.
D Code channel assignment
* Code channel P automatically memorizes an ID code when receiv-
ing a pager call. The contents in channel P cannot be changed
manually.
ID OR
GROUP CODE
CODE CHANNEL
NUMBER
RECEIVE ACCEPT
OR RECEIVE INHIBIT
Your ID code 0 Receive accept only.
Other parties
ID code
15
Receive inhibit should
be programmed in each
channel.
Group code One of 15
Receive accept must be
programmed.
Memory space* P Receive inhibit only.
RECEIVE ACCEPT AND INHIBIT
Code channels 15 can store the transmit codes for per-
sonal calls to other individuals and the group codes for
group calls.
The group codes should be programmed as receive ac-
cept (“” disappears) to receive all calls from group
members.
If transmit codes are not programmed as receive inhibit,
the transceiver accepts calls directed to other individuals
and your answer back may confuse other members in your
groupthis is not a selective calling system. Therefore,
transmit codes should be programmed as receive inhibit
(“” appears) so the transceiver rejects calls directed to
other individuals.
SKIP
SKIP
IC-2710H.qxd 02.2.8 16:55 Page 57 (1,1)
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-2710H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2710H in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info