12296
44
Zoom out
Zoom in
Previous page
1/88
Next page
SCRATCH PAD MEMORY
8
39
What is a scratch pad
memory?
During VFO operation, the transceiver automatically memo-
rizes operating frequency information, separate from regular
memory channels, when transmitting on a new frequency.
The 3 previously operated frequencies for each band can be
recalled.
NOTE: When memory mode is selected, the frequency is
not programmed into a scratch pad.
Calling up a scratch pad
memory
Select the call channel by pushing the desired bands
[M/CALL] once or twice. (A large C appears.)
To transmit on the scratch pad memory, select the desired band
as the main band in advance.
Rotate the selected bands tuning dial to select a scratch
pad memory.
Previously transmitted frequency and one of L1L3 appears.
When first applying power or after CPU resetting, scratch pad
memories contain no data and therefore cannot be accessed.
Push the selected bands [V/MHz] or [M/CALL] to exit the
scratch pad memory.
The 3rd scratch pad memory will be cleared when trans-
mitting on a new frequency. If the transmit frequency is
already stored in a scratch pad memory, the scratch pad
memory is not cleared but the order is changed.
When transmitting on a scratch pad memory, the scratch
pad memory becomes the 1st scratch pad memory and
the order is changed.
Newest
Oldest
The oldest written frequency is cleared.
Order is changed if
transmitting on this
channel.
DUP
DUP
IC-2710H.qxd 02.2.8 16:55 Page 39 (1,1)
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-2710H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2710H in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info