12296
31
Zoom out
Zoom in
Previous page
1/88
Next page
4
BASIC OPERATION
26
The microphone can select the desired output
power directly.
Ä Push [BAND] to select the desired band, if nec-
essary.
Å Push [HIGH] for high output power; [MID] for
middle output power; and [LOW] for low out-
put power.
The output power CANNOT be changed while trans-
mitting.
Crossband full duplex
The transceiver can receive a signal on the sub band while
transmitting on the main band. Using this capability, cross-
band full duplex operation is possible. No special setting is
necessary for crossband full duplex operation.
Set the desired transmit and receive frequencies on the
main and sub bands respectively for your transceiver.
(pgs. 1519)
Set the same frequencies, but set the receive band as the
main band for the other transceiver.
Push and hold [PTT] to operate with full duplex.
Transmitting and receiving activate simultaneously.
One-touch PTT function (at right) and time-out timer are useful
for crossband full duplex operation. (p. 72)
One-touch PTT function
The PTT switch can be operated as a one-touch
PTT switch (each push toggles transmit/receive).
Using this function, you can transmit without push-
ing and holding the PTT switch.
To prevent accidental, continuous transmissions
with the one-touch PTT function, the transceiver
has a time-out timer. See p. 72 for details.
Ä Push [FUNC] then [PTT-M] to turn the one-touch PTT
function ON.
The activity indicator lights green.
Å Push [PTT] to transmit and push again to receive.
Two beeps sound when transmission is started and a long beep
sounds when returning to receive.
•“$ ashes while transmitting with the one-touch PTT func-
tion.
Ç Push [FUNC] then [PTT-M] to turn the one-touch PTT
function OFF.
The activity indicator goes out.
HIGH
4
MID
5
LOW
6
PTT-M
3
IC-2710H.qxd 02.2.8 16:55 Page 26 (1,1)
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-2710H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2710H in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info