Manual Icom IC-2100H (page 63 of 72) (English)

12242

Zoom out

Zoom in

1/72

OTHER FUNCTIONS

■ Data cloning

Cloning allows you to quickly and easily transfer the pro-

grammed contents from one transceiver to another; or , data

from a PC to a transceiver using the optional CS-2100

CLONING SOFTWARE

➀ Connect the OPC-474 cloning cable with adapter plugs to

the [SP] jack of the master and slave transceivers.

• The master transceiver is used to send data to the slave trans-

ceiver.

➁ While pushing [M/CALL] (second switch from right)x, turn

power ON to enter cloning mode (master transceiver

only—power on only for slave transceiver).

•“CLONE” appears and the

transceivers enter the clone

standby condition.

➂ Push [S.MW] on the master transceiver.

•“CLOUT” appears in the mas-

ter transceiver’s display and

the S/RF indicator shows that

data is being transferred to the slave transceiver.

•“CL IN” appears automatically

in the slave transceiver’s dis-

play and the S/RF indicator

shows that data is being received from the master transceiver.

➃ When cloning is ﬁnished, turn power OFF, then ON to exit

cloning mode.

POWER ON

D Cloning using a PC

Data can be cloned to and from a PC (IBM compatible) using

the optional CS-2100

CLONING SOFTWARE

and the optional

OPC-478

CLONING CABLE

. Consult the CS-2100

CLONING

SOFTWARE

HELP ﬁle for details.

D Cloning error

☞ NOTE: DO NOT push any key on the slave transceiver

during cloning. This will cause a cloning error.

When the display at right ap-

pears, a cloning error has oc-

curred.

In such a case, both transceivers automatically return to the

clone standby condition and cloning must be repeated.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2100H in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-2100H Manual

Product: