Manual Icom IC-2100H (page 38 of 72) (English)

12242

Zoom out

Zoom in

1/72

SCRATCH PAD MEMORY

■

What is scratch pad memory?

During VFO operation, the transceiver automatically memo-

rizes operating frequency information when transmitting on a

new frequency. There are 2 types of scratch pad memories,

those for simplex operation, L1–L3, and those for duplex (re-

peater) operation, r1–r3. These memories can be conve-

niently recalled.

☞ NOTE: When memory mode is selected, the frequency is

not programmed into a scratch pad.

■ Calling up a scratch pad

memory

➀ Select the call channel by pushing [M/CALL] once or twice

to display a large “C” in the memory channel display.

➁ Rotate the tuning dial to select a scratch pad memory.

• Previously transmitted frequency and one of “L1”–“L3” or

“r1”–“r3” appears.

• When first applying power of after CPU resetting, scratch pad

memories contain no data and therefore cannot be selected.

➂ Push [V/MHz] or [M/CALL] to exit the scratch pad memory.

☞ NOTES:

➧ The 3rd scratch pad memory (L3 or r3) will be cleared

when transmitting on a new frequency. If the transmit fre-

quency is already stored in a scratch pad memory, the

scratch pad memory is not cleared but the order is

changed.

➧ When transmitting on a scratch pad memory, the scratch

pad memory becomes the 1st scratch pad memory (L1

or r1) and the order is changed.

Newest

Oldest

The oldest written frequency is cleared.

Order is changed if

transmitting on this

channel.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2100H in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-2100H Manual

Product: