32
7
CALL CHANNEL OPERATION
■ Calling up the call channel
Use the call channel to store a most-often-used frequency for
quick recall.
➀ Push [M/CALL] one or twice to display a large “C” in the
memory channel readout.
➁ Push [V/MHz] or [M/CALL] to exit the call channel.
Push [
(MR)CALL] for 1 sec. to select the call chan-
nel.
■ Transferring call channel
contents
➀ Select the call channel by pushing [M/CALL] one or twice.
• A large “C” appears.
➁ Push [S.MW] momentarily, then rotate the tuning dial to se-
lect a memory channel to transfer the contents to.
• To transfer to the VFO, push and hold [(S.MW)MW] instead of
pushing momentarily.
➂ Push and hold [(S.MW)MW] to transfer when a momentary
push was used in the previous step.
• If a name (p. 31) has been programmed into the call channel, the
name is also transferred.
Ä Push [(MR)CALL] for 1 sec. to select the call
channel.
Å Push [FUNC], then [EMW] momentarily.
• To transfer to the VFO, push [FUNC] then push and
hold [EMW] for 1 sec. instead of pushing [EMW]
momentarily.
Ç Push [FUNC] then [EMW] for 1 sec. to transfer
when momentarily pushing [EMW] in step
Å.
• If a name (p. 31) has been programmed into the call
channel, the name is also transferred.
