Manual Icom IC-2100H (page 9 of 72) (English)

12242

Zoom out

Zoom in

1/72

PANEL DESCRIPTION

• “d” appears in place of the 100 MHz digit while the DTMF mem-

ory function is in use. (p. 44)

i S/RF INDICATORS

➥ Show the relative signal strength while receiving signals.

(p. 18)

➥ Show the output power while transmitting. (p. 19)

o MEMORY INDICATOR (p.26)

Appears when memory mode is selected.

!0 MEMORY CHANNEL READOUTS

➥ Show the selected memory channel numbers.

➥ A capital “L” appears while the frequency lock function

is in use. (p. 14)

➥ “C” appears while the call channel is selected. (p. 32)

➥ One of “L1” to “L3” appears when a simplex scratch pad

memory is selected. (p. 34)

➥ One of “r1” to “r3” appears when a duplex scratch pad

memory is selected. (p. 34)

➥ A small “c” appears when VFO mode is selected from

the call channel or a scratch pad memory.

!1 SKIP INDICATOR

Appears when the displayed memory channel is speciﬁed

as a skip channel. (p. 40)

!2 SWITCH INDICATORS

Indicate the function(s) of the front panel switches directly

below the function display.

!3 OUTPUT POWER INDICATORS (p. 19)

➥ “MID” appears when mid output power is selected.

• The IC-2100T Thailand and IC-2100H Taiwan versions have

no mid output power.

➥ “LOW” appears when low output power is selected

➥ Neither indicator appears when high output power is se-

lected.

!4 NARROW FM MODE INDICATOR

Appears when narrow FM mode is selected (available with

the Europe version only; p. 58).

!5 AUDIO MUTE INDICATOR

Appears when the audio mute function is activated via mi-

crophone control.

• This function is cancelled when any switch or control is operated.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2100H in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-2100H Manual

Product: