468525

ICIDU NI-707525 Homeplug starterkit Manual

4
Zoom out
Zoom in
Previous page
1/5
Next page
PLEASE NOTE: SECURING THE NETWORK IS ONLY NECESSARY IN THE EVENT THAT OTHERS ARE
ABLE TO ACCESS YOUR ELECTRICITY NETWORK.
SECURITY USING THE SECURITY AND RESET BUTTON
In order to create a secure network with two or more Homeplug adapters, you can use the
“Security” button. The security code is saved in the equipment, and cannot therefore be read.
SCENARIO 1: SETTING UP A SECURE NETWORK BETWEEN ADAPTER “A” AND “B”.
1. Press the “Security” button on adapter A for 10 seconds until the lamps go out.
2. Press the “Security” button on adapter B for 10 seconds until the lamps go out.
3. Press the “Security” button on adapter A for 1 second.
4. Press the “Security” button on adapter B for 1 second.
5. The lamps on both adapters will go out and then on again. After a maximum of 1
minute, the connection will be set up and secured.
SCENARIO 2: ADD AN ADDITIONAL ADAPTER “C” TO THE NETWORK BETWEEN “A” AND “B”.
1. Press the “Security” button on adapter C for 10 seconds until the lamps go out.
2. Press the “Security” button on adapter A for 1 second.
3. Press the “Security” button on adapter B for 1 second.
4. The lamps on adapter C will go out and then on again. After a maximum of 1 minute,
the connection will be set up and secured.
The “reset” button can be used to return an adapter to its factory settings. The adapter will then
be unsecured, and will only be able to communicate with unsecured adapters. To reset, press
the button for 2 seconds. All lamps will go out briefl y.
LED INDICATORS
The ICIDU 200 Mbps Homeplug adapter has 3 LED indicators
LED indicator Status Indication
Data On Another adapter has been detected on the same network.
Off No adapter has been detected on the same network.
Flashing Activity on the Homeplug network.
Power On The adapter is connected.
Ethernet On The network port is connected correctly and ready to
send/receive data.
Off The network port is not connected correctly.
Flashing The network port is sending/receiving data.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ICIDU NI-707525 Homeplug starterkit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ICIDU NI-707525 Homeplug starterkit in the language / languages: English as an attachment in your email.

The manual is 0,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info