516171
11
Zoom out
Zoom in
Previous page
1/13
Next page
Sehr geehrter Kunde,
Lesen Sie sich bitte die folgende Bedienungsanleitung sorgfältig vor der Inbetriebnahme durch, um durch
Bedienungsfehler bedingte Schäden zu vermeiden. Achten Sie insbesondere auf die
Sicherheitshinweise.
GERÄTEAUFBAU
1. VORDERES SCHUTZGITTER
2. VENTILATORFLÜGEL
3. GITTERBEFESTIGUNGSMUTTER
4. HINTERES SCHUTZGITTER
5. MOTORWELLE
6. MOTORGEHÄUSE
7. SCHWENKSCHALTER
8. STUFENSCHALTER
9. SCHALTKREISGEHÄUSE
10. FESTSTELLSCHRAUBE
11. OBERES STANDROHR
12. VERBINDUNGSSTÜCK
13. UNTERES STANDROHR
14. KREUZSOCKEL
ZUSAMMENBAU
1. Secure lower pipe with Pipe support to the hub of Cross Base with screw provided.
2. Extend upper pipe, insert the pipe connector through upper pipe onto lower pipe and tighten.
3. Attach the motor with switch compartment onto the upper pipe. Ensure the switch compartment
is pushed fully onto the upper pipe and secured with the screw provided.
4. Loosen Guard Mounting Nut from the Motor Housing.
5. Position Back Guard firmly to Motor Housing and then fasten by turning Guard Mounting Nut
clockwise tightly.
6. Push the Blade along Motor Shaft and fasten firmly with the Blade.
7. Hang the Front Guard to Back Guard with the position fixer provided at the rim of Guard, and
then fix together with clips provided.
OSCILLATION CONTROL
1. Befestigen Sie das untere Standrohr mit Rohrverbindungstück am Kreuzsockel.
2.
Verlängern Sie das obere Standrohr und fügen Sie es in das Rohrverbindungsstück. Ziehen Sie
es daraufhin fest.
3.
Befestigen Sie das Motorgehäuse und das Schaltkreisgehäuse am oberen Standrohr.
Vergewissern Sie sich, dass das Schaltkreisgehäuse vollständig auf das obere Standrohr
geschoben und mit der mitgelieferten Schraube befestigt wird.
4.
Lösen Sie die Befestigungsmutter des Schutzgitters vom Motorgehäuse.
5.
Positionieren Sie das hintere Schutzgitter fest am Motorgehäuse und befestigen Sie es, indem
Sie die Befestigungsmutter im Uhrzeigersinn festschrauben.
6.
Schieben Sie den Ventilatorflügel auf die Motorwelle und befestigen Sie ihn.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ices IF 1045 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ices IF 1045 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info