566964

Ices ICRP-211 Manual

4
Zoom out
Zoom in
Previous page
1/28
Next page
RADIO OPERATION
1. Press the ON Button until the display change to radio mode.
2. Select the AM or FM band by pressing the BAND Button. Then the AM or FM
indicator will light on.
3. Tune a station by pressing the TUNING UP/DOWN Button.
Pressing either TUNING UP/DOWN Button for more than 0.5 seconds to activate
the automatic tuning mode. The automatic tuner will scan up or down and lock onto
the next station. If the automatic tuning does not precisely tune into a radio station,
press the TUNING UP/DOWN Button to adjust the tuning.
4. Adjust the volume by pressing VOLUME UP/DOWN Button.
The volume indicator will be changing and represent the volume level.
5. To turn off the radio, press once the ON Button then it will return to Standby mode.
6. After tuned into a radio station, the unit will return to show the current time instead of
the radio frequency after a few seconds. If you want to check the radio frequency, press
once the TUNING UP or TUNING DOWN button then the unit will show the radio
frequency for a few seconds.
STORES PRESET STATIONS
Up to 20 stations (10 AM and 10 FM) can be stored in memory :
1. Tune to a desired station as described in above.
2. Press the Time Set / Memory Button, the Preset Station Number will be flashing.
3. Select your desired Preset Station Number you wish to store your station while the
Number is flashing by pressing once or more times the Preset Button. When the
desired number is flashing, press once again the Time set / Memory Button. Then the
Number will stop flashing. Now the station is stored in the desired preset station.
To replace a station stored in the memory, repeat all the stages described above. The
new station will replace the previously stored one.
To receive Preset Stations :
1. Under RADIO mode, select the waveband by pressing the Band Button.
2. Press once or more times the Preset Button to select the desired Preset Station
Number.
TO SET THE ALARM TIME AND THE ALARM MODE
Make sure the unit is in Standby mode, that means the AM or FM Indicator is not light on.
1. Press once the Alarm Button. Then the alarm time will be flashing.
2. Press the Hour Button to adjust the hour digit.
3. Press the Minute Button to adjust the minute digit.
ICES ICRP211 (English).p65 2010/7/29, ¤U¤È 04:534
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ices ICRP-211 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ices ICRP-211 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info