Manual Ices IBM-500 (page 11 of 55) (English, German, Dutch, French)

515475

Zoom out

Zoom in

1/55

Warning

Do not attempt to start operating the bread maker, before it has either cooled down or

warmed up. If the display shows “HHH” after the programme has been started, it

means that the temperature inside of bread pan is too high. You should stop the

programme and unplugged the power outlet immediately. Then open the lid and let the

machine cool down completely before using again.

If the display shows “LLL” after the programme has been started, it means that the

temperature inside of bread pan is too low. You should place the bread maker on a

higher environment for using.

If the display shows “EE0” after you have pressed “Start/Stop” button, it means the

temperature sensor open circuit, please check the sensor carefully by Authorized

expert. If the display shows “EE1”, it means the temperature sensor short circuit.

GB-10

11.Cleaning and Care

Warning

Pull the power plug out of the wall socket each time and allow the appliance

to cool down. Protect the appliance against splashing water and moisture, as these

could lead to an electric shock. Please also observe the safety instructions.

Important

The parts and accessories of the appliance should not be washed in a dish washing

machine.

Casing, lid, baking chamber

Remove all particles left behind inside the baking area using a wet cloth or a slightly

wet soft sponge. Wipe the casing and the lid too with a wet cloth or sponge. Make sure

that the inside area is fully dry.

Bread pan and kneading paddle

The surfaces of the bread pan and kneading paddle have a non-stick coating. While

cleaning, do not use any abrasive detergents, cleaning powders or objects that may

cause scratches on the surface. Due to moisture and vapor the surface of various

parts may undergo changes in their appearance over a period of time. This does not

affect the quality or functional performance of the appliance. Before cleaning, take the

bread pans and kneading paddles out of the baking area. Wipe the outside of the

bread pans with a damp cloth.

Important

Never immerse the bread pans in water or other liquids. Clean the interior of the bread

pans with warm, soapy water. If the kneading paddles are incrusted and hard to

release, fill the bread pan with hot water for approx. 30 minutes. If the retainer in the

kneading paddle is clogged, you can clean it carefully with a wooden skewer. Do not

use any chemical cleaning agents or thinners to clean the bread maker.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ices IBM-500 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ices IBM-500 Manual

Product: