515475
3
Zoom out
Zoom in
Previous page
1/55
Next page
1.Important information for your safety
Setup
• Check the bread maker for transport damage after unpacking. If necessary, contact
your supplier.
• Place the appliance on a dry, flat and heat-resistant surface.
• Do not place the appliance near gas burners, electric ovens or other heat sources.
• Do not place the appliance near any inflammable materials, explosive and/or
self-igniting gases.
• Make certain that the ventilation slits of the appliance are not covered.
• Before plugging in the appliance, check whether the electricity type and mains
voltage match the information on the type plate.
• Do not draw the power cord over sharp edges or close to hot surfaces or objects.
This may damage the insulation of the power cord.
• To prevent anyone from tripping over, the appliance is provided with a short power
cord.
• If you plan to use an extension cable, make sure that the maximum permissible
power rating of the cable corresponds with that of the bread maker.
• Place the extension cable in such a way as to prevent anyone from tripping over it or
pulling it accidentally.
•This appliances are not intended to be operated by means of an external timer or
separate remote-control system.
•The largest bread can be made is 1.0Lb(500g), so the maximum quantities of flour
and Yeast that may be used shall follow the Bread Maker Cookbook
During operation
• Check the condition of the power cord and plug frequently. If the power cord of this
appliance is damaged, it must be replaced by the manufacturer, the manufacturer's
customer service or a similarly qualified person to avoid associated dangers.
• Children using electrical appliances or standing close to them may be allowed only
under the supervision of an adult.
• This appliance complies with the normal safety regulations. Inspection, repair and
technical maintenance may only be performed by a qualified specialist.
• Do not place any objects on the appliance and do not cover it during operation. Fire
Hazard!
• Caution, the bread maker becomes hot. Only touch the handles and touch buttons of
the appliance. If necessary, use a kitchen cloth.
• Before taking out the accessories or inserting them, allow the appliance to cool down
and unplug the power cord.
• Do not re-locate the bread baking machine if the bread pan contains hot ingredients
GB-2
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ices IBM-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ices IBM-500 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info