214225
45
Zoom out
Zoom in
Previous page
1/74
Next page
5. Carefully remove the lamp housing. Dispose of the lamp in an
environmentally proper manner.
6. Install the new lamp housing and tighten the screws.
7. Re-attach the lamp connector to the projector. The locking tab should engage
when the connector is fully plugged in.
8. Replace the lamp door.
9. Plug in the power cord and toggle the Power switch to turn the projector back
on.
10. To reset the lamp hour timer, navigate to the Settings>Service menu and
select Lamp Reset. For more information, see “Settings menu” on page 5-5.
Cleaning the lamp housing screens
In dirty or dusty environments, the two dust filter screens in the lamp housing can
become clogged, causing high temperatures and premature lamp failure. Routine
maintenance to remove dust from the screens lowers the lamp operating
temperature and prolongs lamp life. To maximize lamp life you should clean the
screen every 250 hours.
To clean the lamp housing screens:
1. Remove the lamp housing. Figure A-3 on page A-4 provides an illustration of
the lamp housing.
1 Connector
2 Locking tab
3 Lamp housing
4 Screws
5 Lamp cable
Figure A-2. Lamp housing parts
Appendix A. Maintenance A-3
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ibm ilv 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ibm ilv 300 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info