214225
29
Zoom out
Zoom in
Previous page
1/74
Next page
Caution
To reduce the risk of injury to the eyes, do not look directly into the remote
control laser light and do not point the laser light into anyone’s eyes. The
remote control is equipped with a Class II laser that emits radiation.
To operate the remote control, point the remote at the projection screen or at the
projector (not at the computer). The range of optimum operation is about 15 feet
(4.5m).
To use the laser pointer, press and hold the Laser button. The laser turns off when
the button is released, or times out after two (2) minutes of continuous operation.
Pressing the remote’s power button when the projector’s power toggle switch is in
the Off position does not cause the projector to power up. You need to put the
projector’s power toggle switch in the On position to use the remote to power on
the projector.
When the projector is running, you can press the remote’s Power button to place
the projector in the Off state and power it off. For more information, see “Shutting
down the projector” on page 4-7.
Left and right remote mouse buttons are used to mimic the actions of the left and
right mouse buttons on your computer. Mouse cursor movement is managed via
the remote’s cursor control. Connect a USB cable to the USB connector on the
computer and to the projector to use these buttons and control your computer’s
mouse. When you do this for the first time, the Add New Hardware wizard may
appear. See “Using the projector with Windows 98” on page 2-4 for details on
loading the correct USB drivers.
Press the remote’s Menu button to open the projector’s menu system. Use the
arrow buttons to navigate, and the Select button to select features and adjust
values in the menus. See Chapter 5, “Using the menus”, on page 5-1 for more
information on the menus.
The remote also has Volume and Mute buttons to control the sound, a backlight
button to light the remote’s buttons in the dark, and Video and Computer buttons
to switch between sources.
Two presentation-specific features are also provided. Use the Blank button to
display a blank screen instead of the current slide (you can choose which color is
displayed, see “Settings menu” on page 5-5); use the Effect button to invoke a
user-definable action, such as freeze, zoom or change your aspect ratio for viewing
DVDs (see “Settings menu” on page 5-5) to learn to program this button).
If you are displaying presentations in Microsoft
®
PowerPoint, you can use the
remote’s mouse buttons to navigate through your presentation while in Slide Show
mode. To configure PowerPoint for this Choose Options from the PowerPoint
Tools menu, click the View tab, de-select the Popup Menu on Right Mouse Click
option in the Slide Show section, then click OK. After that, when you are in
Chapter 4. Using the projector features 4-3
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ibm ilv 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ibm ilv 300 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info