214225

Ibm ilv 300 Manual

13
Zoom out
Zoom in
Previous page
1/74
Next page
Chapter 2. Setting up the projector
This chapter provides information on positioning the projector, connecting a
computer source, using the projector with Windows
®
98, and displaying and
adjusting a computer source image.
Note: You can use your projector with Presentation Director to plan and give
presentations with confidence. You can ensure that your computer and
display will not turn off or go blank during a presentation, be sure your
graphics and text will be as crisp and clear, and save important display
settings for future presentations with the same equipment. For additional
information on Presentation Director, go to the
http://www.ibm.com/pc/support Web site and search on ″Presentation
Director.″
Positioning the projector
To determine where to position the projector, consider the size and shape of your
screen, the location of your power outlets, and the distance between the projector
and the rest of your equipment. Following are some general guidelines:
v Position the projector on a flat surface at a right angle to the screen. The
projector must be at least 4.9 feet (1.5 m) from the projection screen.
v Position the projector within 10 feet (3m) of your power source and within 6 feet
(1.8m) of your video device (unless you purchase extension cables). To ensure
adequate cable access, do not place the projector within 6 inches (.15m) of a wall
or other object.
v Position the projector the desired distance from the screen. The distance from the
lens of the projector to the screen, the zoom setting, and the video format
determine the size of the projected image, as shown in Figure 2-1.
For more information about image sizes at different distances, see “Projected
image size” on page 2-7.
v The image exits the projector at a given angle, as shown in Figure 2-2 on
page 2-2. The image offset is 112.2% when the projector is in 4:3 default mode.
This means that if you have an image 10 ft high, the bottom of the image will be
1.22 ft above the center of the lens.
3.3 ft
5 ft
12.5 ft
4.9 ft
7.5 ft
19 ft
Figure 2-1. Projection distances
© Copyright IBM Corp. 2003 2-1
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ibm ilv 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ibm ilv 300 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info