214464
47
Zoom out
Zoom in
Previous page
1/82
Next page
Appendix B. Troubleshooting
The following table provides troubleshooting information for the projector. In some
cases, more than one possible solution is provided. Try the solutions in the order
they are presented. When the problem is solved, you can skip the additional
solutions.
Table B-1. Troubleshooting
Problem Solution
No image appears on the screen.
v Verify the settings on your notebook or desktop PC
v Turn off all equipment and power up again in the
correct order.
The image is blurred.
v Adjust the Focus on the projector.
v Press the Auto button on the remote control or
projector.
v Ensure the projector-to-screen distance is within the
10 m (33 ft) specified range.
v Check that the projector lens is clean.
The image is wider at the top or
bottom (trapezoid effect).
v Position the projector so it is as perpendicular to the
screen as possible.
v Use the Keystone button on the remote control or
projector to correct the problem.
The image is reversed or upside
down.
Check the Projection setting on the Setup menu of the
OSD.
The image is streaked.
v Set the Frequency and Tracking settings on the Setup
menu of the OSD to the default settings.
v To ensure the problem is not caused by a connected
PC’s video card, connect to another computer.
The image is flat with no contrast. Adjust the Contrast setting on the main menu of the
OSD.
The color of the projected image
does not match the source image.
Adjust the Color Temp. and Gamma settings on the
ColorMgr menu of the OSD.
There is no light from the
projector.
v Check that the power cable is securely connected.
v Ensure the power source is good by testing with
another electrical device.
v Restart the projector in the correct order and check
that the Power LED is green.
v If you have replaced the lamp recently, try resetting
the lamp connections.
v Replace the lamp module.
v Put the old lamp back in the projector and have the
projector serviced.
© Copyright Lenovo 2005. © Portions Copyright IBM Corp. 2004. B-1
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ibm e 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ibm e 500 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info