511748

Ibm 8310 Manual

276
Zoom out
Zoom in
Previous page
1/314
Next page
3.
Select
APM
BIOS
Mode
within
the
APM
sub
menu
and
be
sure
it
is
set
to
Enabled.
If
it
is
not,
press
Left
Arrow
(})
or
Right
Arrow
(Æ)
to
change
the
setting.
4.
Select
Automatic
Hardware
Power
Management.
5.
Set
Automatic
Hardware
Power
Management
to
Enabled.
6.
Select
values
for
the
three
categories
of
power
management
(system
power,
processor
speed,
and
display),
as
necessary.
7.
Set
Hard
Disk
to
Enabled
or
Disabled.
Note:
This
does
not
apply
to
SCSI
drives.
8.
Press
Esc
twice
to
return
to
the
Configuration/Setup
Utility
program
menu.
9.
Before
you
exit
from
the
program,
select
Save
Settings
from
the
Configuration/Setup
Utility
program
menu.
10.
To
exit
from
the
Configuration/Setup
Utility
program,
press
Esc
and
follow
the
instructions
on
the
screen.
Automatic
Power-On
features
The
Automatic
Power-On
features
within
the
Power
Management
menu
allow
you
to
enable
and
disable
features
that
turn
on
the
computer
automatically.
v
Serial
Port
A
Ring
Detect:
With
this
feature
set
to
Enabled
and
an
external
modem
connected
to
serial
port
(COM1),
the
computer
will
turn
on
automatically
when
a
ring
is
detected
on
the
modem.
v
PCI
Modem
Ring
Detect:
With
this
feature
set
to
Enabled
,
the
computer
will
turn
on
automatically
when
a
ring
is
detected
on
the
internal
modem.
v
PCI
Wake
Up:
This
feature
allow
PCI
cards
that
support
this
capability
to
wake
the
system.
v
Wake
Up
on
Alarm:
You
can
specify
a
date
and
time
at
which
the
computer
will
be
turned
on
automatically.
This
can
be
either
a
single
event
or
a
daily
event.
v
Wake
on
LAN:
If
the
computer
has
a
properly
configured
token-ring
or
Ethernet
LAN
adapter
card
that
is
Wake
on
LAN-enabled
and
there
is
remote
network
management
software,
you
can
use
the
IBM-developed
Wake
on
LAN
feature.
When
you
set
Wake
on
LAN
to
Enabled,
the
computer
will
turn
on
when
it
receives
a
specific
signal
from
another
computer
on
the
local
area
network
(LAN).
270
Hardware
Maintenance
Manual
… 276 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ibm 8310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ibm 8310 in the language / languages: English as an attachment in your email.

The manual is 8,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info