770404

Ibiza Sound AMP- 800 Manual

4
Zoom out
Zoom in
Previous page
1/10
Next page
©CopyrightLOTRONIC2011Page4
SPECIFICATIONS
AMP-300 AMP-600 AMP-800 AMP-1000 AMP-2000
Music power
2 x 240W 4 2 x 480W 4 2 x 600W 4 2 x 800W 4 2 x 1500W 4
2 x 160W 8 2 x 320W 8 2 x 400W 8 2 x 600W 8 2 x 1000W 8
Total harmonic
distorsion ≥0,5% ≥0,5% ≥0,5% ≥0,5% ≥0,5%
Freq. Range 20-20.000Hz ≥0,5dB ≥0,5dB ≥0,5dB ≥0,5dB ≥0,5dB
Noise ≥98dB ≥98dB ≥98dB ≥98dB ≥98dB
Channel separation
(f=1kHz) ≥82dB ≥82dB ≥82dB ≥82dB ≥82dB
Input level ≥0dB ≥0dB ≥0dB ≥0dB ≥0dB
Input impedance ≥10k ≥10k ≥10k ≥10k ≥10k
Power supply 230Vac,
50-60Hz
230Vac,
50-60Hz
230Vac,
50-60Hz
230Vac,
50-60Hz
230Vac,
50-60Hz
INSTALLATION
Electrical Connections
Prior to connecting the amplifier on a wall outlet, check following points
The mains outlet must be earthed and comply with the safety regulations. If in doubt, ask and electrician.
The mains voltage must correspond to the supply voltage indicated on the rear panel (+/-10%)
The On /Off switch must be in OFF position
The amplifier must be switched off prior to unplugging the mains lead.
Power On/Off
Always switch on the amplifier at last and switch it off at first in your audio installation. Set all controls to the
minimum in order to avoid unpleasant and even dangerous noise.
Installation and Operation
Your amplifier is a high power unit that must be installed at a well ventilated place far from heat, humidity, shocks
and dust to avoid malfunction, defaults, electrical shocks and the risk of fire. The cooling air enters via the front
panel and leaves via the rear panel. The good ventilation is therefore of paramount importance. If you install the
amplifier in an equipment rack or a flight case, make sure not to obstruct the air flow. Never install the amplifier in
a closed rack or flight case as a part of the heat is evacuated by the metal ground plate. It is recommended to
leave at least one free space below the amplifier.
Audio Connections
Prior to making any connections, switch off all units that you wish to interconnect. Only use high quality leads that
are suitable for this application. Handle the cables with care and check the air flow regularly. Only pull the plugs,
never the cable. Do not use force to unplug a lead. Always roll the cables without making knots or bending them
in order to ensure a long lifetime, proper operation and optimal performance.
Prevention and Detection of Interference
Make sure to install the amplifier in a place far away from industrial and high frequency radiations. Avoid to install
the amplifier near a radio, TV or mobile phone. These equipments are sources of interference.
When you connect the other components of your installation, avoid the constitution of ground loops that are
detrimental to the excellent sound qualities of the amplifier and potentially dangerous. He best way (although not
always achievable) to avoid ground loops is to connect the ground of all components to a central point (star
connection). The central point of a sound installation is the mixer.
In order to determine the cause of interference, connect the different sections of the mixer in the following
sequence to the other units. Only make the next connection once you have checked the sound of the actual one.
Outputs : Amplifier and speakers (Master outputs)
Amplifier and monitor speakers (AUX outputs)
Effect units (AUX outputs ord effect in/outputs)
Inputs : Instruments with line signal (keyboards, samplers, recorders, etc.)
Microphones (one after the other)
Electric products must not be put into household waste. Please bring them to a
recycling centre. Ask your local authorities or your dealer about the way to proceed.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ibiza Sound AMP- 800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ibiza Sound AMP- 800 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info