441951

IAudio 5 Manual

19
Zoom out
Zoom in
Previous page
1/38
Next page
iAUDIO 5
36
iAUDIO 5
37
4. Mic Volume
• Set the volume level of the built-in mic.
• Volumes that are too high may cause amplified noise, electric noise, peaking or
distortion and degrade the recording quality.
• You can select a value between 1 and 10. Higher values mean higher amplification.
• Select Mic Volume and press the MENU button. Use the + and – buttons to select
a desired value.
5. Voice Active
• Recording pauses when there is no sound input during recording and restarts
when there is sound. This feature saves memory.
• You can select a value between 0 and 10. Smaller values mean greater sensitivity.
If you set this value too high relative to the surrounding sounds, recording may
not be activated as intended. Set this value to 0 when making important recording
to guarantee that recording begins.
• Select Voice Active and press the MENU button. Use the + and – buttons to
select a desired value.
6. Line Volume
• Set the volume level of incoming signals from the Direct Encoding jack.
• You can select values between 1 and 10. Higher values mean higher
amplification.
• Select Line Volume and press the MENU button. Use the + and – buttons to
select a desired value.
7. Auto Sync
• Auto Sync senses sound from the Line-in jack and automatically recognize blank
intervals between tracks to create separate files for different tracks.
• You can select between 0 and 8. 0 is Off. Higher values means longer interval
between tracks.
• The above numbers are not in seconds.
• Select Auto Sync and press the MENU button. Use the + and – buttons to select a
desired value.
Detailed Descriptions by Menu
Recording
Recording
1. Line-in bps
• Set the bit rate (quality) of MP3 files recorded through Line-in.
• You can select 96, 112, 128 kbps.
• Select Line-in bps and press the MENU button. Use the + and – buttons to select a
desired value.
2. Voice bps (Built-in Mic)
• Sets the bit rate (quality) of files recorded through the built-in mic on the front of
iAUDIO.
• You can select 96, 112, 128 kbps.
• All MP3 files recorded through the built-in mic are Mono.
• Select Voice bps and press the MENU button. Use the + and – buttons to select a
desired value.
3. FM Radio bps
• Set the bit rate (quality) of MP3 files recorded by pressing REC while listening to
FM radio.
• You can select 96, 112, or 128 kbps.
• Select FM Radio bps and press the MENU button. Use the + and – buttons to select a
desired value.
Detailed Descriptions by Menu
Recording
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for IAudio 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of IAudio 5 in the language / languages: English as an attachment in your email.

The manual is 6,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info