662884
4
Zoom out
Zoom in
Previous page
1/41
Next page
EN 76
cket of the power adapter. After charging, please disconnect the i.safe PROTECTOR
USB cable from the power adapter.
BATTERY USE
In actual use the run time of the device varies with the network status, working envi-
ronment and usage. If you do not charge for a long time, the device will be powered
o automatically.
WARNING
The device may only be charged at ambient temperatures in a range from 5°C … 35°C.
Please do not use charging equipment if the temperature exceeds this range.
POWERING ON/OFF THE ISRSM1.1
Press the [Power key] until the blue LED lights up. A tone will conrm the readiness.
Press the [Power key] again and a tone will conrm the powering o.
PAIRING ISRSM1.1 WITH YOUR DEVICE
In the powering OFF mode, press and hold the [Power key] for about 8 seconds.
When the IS-RSM1.1 has entered the pairing mode, the indicator light ashes red
and blue alternately.
Turn ON the Bluetooth on your mobile device and search for the IS-RSM1.1. Select
and match. When LED indicators turn to blue, the pairing succeeds.
KEYS AND SPECIAL FEATURES
(see illustration on page 2)
1 POWER KEY: Power ON/OFF the IS-RSM1.1
2 EARPHONE JACK: The built-in speaker will be shut down automatically when
the earphone is plugged in. Do not open the earphone ack in hazardous areas.
3 RESET KEY: Press to restart the IS-RSM1.1
4 VOLUME UP KEY: To control the volume up.
5 VOLUME DOWN KEY: To control the volume down.
6 USBPORT: To connect the delivered USB cable for charging.
7 CHARGING CONTACTS: For charging with the optional desktop charger.
8 PTT KEY: Long press for speaking and use PTT (for example BPER).
9 SOS KEY: To trigger the One-Button-Alarm on Mandown-Detection-APP
(supported phone models and application provided!).
RECYCLING
The crossed-out wheeled-bin symbol on your product, battery, literature, or packaging
reminds you that all electrical and electronic products, batteries, and accumulators
must be taken to separate collection at the end of their working life. This requirement
applies in the European Union. Do not dispose of these products as unsorted municipal
is prohibited. This device may aect proper work of medical equipment, such
as pacemakers, so always keep a distance of at least 15 cm between the device and
these devices.
Observe all corresponding laws that are in force in the respective countries regarding
the use of devices while operating a vehicle.
Please power o the device and disconnect the charging cable before cleaning
the device.
Do not use any chemical cleaning agents to clean the device or the charger.
Use a damp and anti-static soft cloth for cleaning.
Do not discard old and abandoned lithium batteries into the trash, send them
to designated waste disposal locations or return them to i.safe MOBILE GmbH.
WARNING
i.safe MOBILE GmbH will not assume any liability for damages caused by disregarding
any of these advices or by any inappropriate use of the device.
I.SAFE PROTECTOR
The IS-RSM1.1 contain specially designed safety circuits. Connecting the charger
to non-ex-approved equipment like a computer can endanger the safety of the
device, as faults in the non-approved equipment could lead to a power surge into
the device large enough to destroy the safety circuits.
The i.safe PROTECTOR is a USB cable for connecting the device with non-ex-
approved equipment. It contains additional safety circuits to protect the device
from possible faults in the non-ex-approved equipment.
For this reason, charging and data connection is only allowed using the i.safe
PROTECTOR.
MAINTENANCE/REPAIR
Please note any legal requirements for periodic inspection.
The device itself has no user-serviceable parts. It is recommended to perform
inspections according to the safety regulations and advises.
If there is a problem with the device, please contact your vendor or consult the service
center. If your device is in need of repair, you can either contact the service center or
your vendor.
BATTERY
The battery in this device is not removable by the user. The battery is not fully charged
when the device is purchased, but it contains enough energy to power on the device.
To obtain best battery performance and battery life, let the battery discharge comple-
tely before charging it completely for the rst three charging cycles.
CHARGING THE BATTERY
Connect the i.safe PROTECTOR USB cable to the USB connector at the bottom of
the device. Connect the other side of the i.safe PROTECTOR USB cable with the so-
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for i.safe Mobile IS-RSM1.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of i.safe Mobile IS-RSM1.1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info