662883

i.safe Mobile IS-MP.2 Manual

8
Zoom out
Zoom in
Previous page
1/20
Next page
8
READ OF TRANSPONDERS
Hold the top of the device near to a transponder and make a short press on [Key 1].
If the transponder can be read, the display will indicate the transponder type and
the UID and the device gives a short vibrate.
If there is no transponder in reading area, the display will indicate “NO TAG” vibrate
in a longer sequence.
The multipen will indicate automatically supported transponders as follows:
LF 125/134 kHz: EM 41xx, EM 42xx, HTS, FDX-B, HDX
HF 13,56 MHz: ISO 15693, ISO 14443, NFC
UHF 860 MHz … 960 MHz
BLUETOOTH CONNECTION
Turn the I S-M P.2 ON [On/O Key]. Press [Key 2] for turn On and O the Bluetooth
function. For pairing with other devices push and hold [Key 2]. The Display will
indicate “Pairing Bluetooth …” and after successful pairing the IS -MP. 2 will be listed
as RNBT-E5D5 in paired Bluetooth device.
The display of the IS -MP. 2 will indicate “End of pairing”. For existing connection
the display of the IS -M P. 2 indicate a BT icon top right. For lost connection the BT icon
will be framed.
READ TRANSPONDERS ON PC OR ANDROID™ DEVICE
For reading the transponders via Bluetooth you have to install “WINDOWS
TIDMULTIPEN V.1.x” on PC. For Android device install the application
“TECTUS MultiPen” available on Google Play™ Store.
HUMAN INTERFACE DEVICE (HID)
Powering O and connect the I S-MP.2 with the delivered USB cable to the
USB port on your PC. The display of the I S-MP.2 lights up and indicate an USB icon
on top right of the display.
Open an Excel sheet and read a transponder. The UID of the transponder
will be imported automatically to any position of cursor on PC.
8
READ OF TRANSPONDERS
Hold the top of the device near to a transponder and make a short press on
[Key 1]
.
If the transponder can be read, the display will indicate the transponder type and
the UID and the device gives a short vibrate.
If there is no transponder in reading area, the display will indicate “
NO TAG
” vibrate
in a longer sequence.
The multipen will indicate automatically supported transponders as follows:
LF 125/134 kHz:
EM 41xx, EM 42xx, HTS, FDX-B, HDX
HF 13,56 MHz:
ISO 15693, ISO 14443, NFC
UHF 860 MHz … 960 MHz
BLUETOOTH CONNECTION
Turn the
IS - MP. 2
ON
[On/O Key]
. Press
[Key 2]
for turn On and O the Bluetooth
function. For pairing with other devices push and hold
[Key 2]
. The Display will
indicate “
Pairing Bluetooth …
” and after successful pairing the
IS - MP. 2
will be listed
as
RNBT-E5D5
in paired Bluetooth device.
The display of the
IS - MP. 2
will indicate “
End of pairing
”. For existing connection
the display of the
IS - MP. 2
indicate a BT icon top right. For lost connection the BT icon
will be framed.
READ TRANSPONDERS ON PC OR ANDROID™ DEVICE
For reading the transponders via Bluetooth you have to install “
WINDOWS
TIDMULTIPEN V.1.x
” on PC. For Android device install the application
“
TECTUS MultiPen
” available on Google Play™ Store.
HUMAN INTERFACE DEVICE (HID)
Powering O and connect the
IS - MP. 2
with the delivered USB cable to the
USB port on your PC. The display of the
IS - MP. 2
lights up and indicate an USB icon
on top right of the display.
Open an Excel sheet and read a transponder. The UID of the transponder
will be imported automatically to any position of cursor on PC.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for i.safe Mobile IS-MP.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of i.safe Mobile IS-MP.2 in the language / languages: English, German as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info