521902
4
Zoom out
Zoom in
Previous page
1/6
Next page
6 7
English
Please keep these instructions in a safe place for future reference.
1. Introduction
The i.onik
®
Outdoor Bell Box:
It is designed to be tted to the front of the property in a highly visible position, providing a perma-
nent visual deterrent to intruders. If the i.onik
®
Alarmsystem Smart Panel is triggered the siren will
sound and the strobe light will ash.
It has a typical battery life of 2 years or more before they need changing.
It is tamper protected. Any unauthorized tampering with the bell box will result in an alarm. This
feature can be turned off by the user when a battery change is required.
It’s alarm duration is adjustable. The user may choose the alarm to sound from 1 to 10 minutes
when it triggered.
2. Location
Work out the best places to locate the bell box for maximum protection. Having chosen the locations
do not mount at this stage.
The bell box should be placed:
on the outside of the property and within range of the i.onik
®
Alarmsystem Smart Panel (please test
before proceeding with installation).
away from extreme temperature sources (radiators, ovens, stoves etc) and large metal objects that
could interference with wireless performance.
3. Installation
The easiest way to get to know the system and get it up and running quickly is to get all the devices
and accessories programmed on a table top before locating and mounting them. You will need the
following devices to complete the set up:
You may contact the local distributor to purchase the full security kit.
3.1 First Time Installation:
a. Remove the bell box cover by unscrewing the single screw located on the lid.
b. Insert 4x fresh alkaline ‘D’ cells, noting their polarity.
c. Set the house security code same as the Smart Panel by moving the “house security code pro-
gramming” switches (refer to “House Security Code Settings section”)
d. Set the alarm duration between options 1/3/5/10 minutes by moving the “alarm duration program-
ming” switches (at least choose 1 option).
e. Turn the power switch to ON, all blue lights will be ON indicating the tamper protection is disabled.
f. Press the learn button to enrol the remote of i.onik
®
Alarmsystem into the bell box.
g. Completing the remote’s enrollment by pressing button on the remote of i.onik
®
Alarmsystem.
The bell box beeps and ashes once enrollment successeded.
h. Press the learn button to complete the enrollment.
i. The bell box is now ready for mounting. Do not replace the cover yet.
3.2 Mounting the Bell Box
Before mounting the bell box ensure that the tamper protection is disabled as described below.
a. All blue LED lights are ON. If not, you will need to disable the tamper protection using the remote
of i.onik
®
Alarmsystem. Press buttons at the same time for 2 seconds.
The tamper protection is now disabled for 1 hour.
If more time is required, simply repeat the step above.
b. Ensure the tamper switch is fully depressed when
the siren is mounted. If there is a gap, pack with a
suitable spacing material.
c. Using the large screws and wall plugs provided, mount on the desired wall through the mounting
holes.
d. Fix the bell box cover with the securing screw.
ON KIQ
OFF
ON
1
2
3
4
10M
5M
3M
1M
HOUSE CODE
ALARM
DURATION
DC Power jack
House security code
programming switch
Alarm duration
programming switch
Learn button
BATTERY COMPARTMENT
4 X D CELLS
4xFixing Screws
Power button
Tamper switch
Tamper switch
Important! Before mounting it is
important to disable the tamper
protection to avoid the bell box
sounding an alarm.
Enter/Exit change
battery mode
WS-201TX Key Fob remote
(It is either included in the
WS-100 security kit or you may
purchase it seperately)
Spring compressed
firmly against wall
Bottom of
the Bell box
Spring Guide
Wall
Smart Panel
(This is not included in this kit)
Key fob remote control
(This is not included in this kit)
Bell Box
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for I-onik WS-209 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of I-onik WS-209 in the language / languages: English, German as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info