521912
14
Zoom out
Zoom in
Previous page
1/20
Next page
26 27
Note:
- If pairing fails, please turn off the headset rst and then
repair according to steps 1-6 above.
- Once pairing is successful, the headset and the mobile phone
will remember each other; there will be no need to repair
next time. The headset can remember 8 paired devices. When
the number of paired devices exceeds 8, the rst one will be
replaced.
- Every time the headset is turned on, it will connect to the
last connected device automatically. If you want to pair it
with other devices, turn off the Bluetooth function of the last
connected device then pair the headset with the new device,
following steps 1-6 above.
3) Pairing the Headset with a Bluetooth Transmitter
You can connect the headset to a Bluetooth transmitter, to
enjoy music wirelessly. Take a BTT010 (Bluetooth transmit-
ter for iPod and iPhone - not included), for example. The
pairing steps are as follows:
1) Keep your headset and phone within 1 metre when
pairing.
2) Set the headset to enter pairing mode (refer to “How to
enter pairing mode”).
3) Turn on the Bluetooth transmitter. It will search for Blue-
tooth devices automatically and send a pairing request.
4) When the headset requests you to enter a PIN number,
the transmitter will respond “0000” automatically.
5) After successful pairing and connecting, the blue LED
indicator on the headset ashes twice every 4 seconds.
Note:
- The pairing password of the headset is “0000”. The headset
can, therefore, only pair with a Bluetooth transmitter whose
pairing password is “0000”.
- If pairing still fails after several tries, refer to the Bluetooth
transmitter user’s manual for further information.
4) Multi-pairing
The headset can connect with two devices at most. One is a
Bluetooth mobile phone supporting a HFP prole; the other
one is a Bluetooth music device supporting an A2DP prole.
If you want to nish the multi-pairing, proceed as follows:
1) Firstly, pair the headset with a Bluetooth transmitter
(refer to “Pairing the headset with a Bluetooth trans-
mitter”).
2) Turn off the Bluetooth transmitter.
3) Pair and connect the headset with a Bluetooth mobile
phone (refer to “Pairing the headset with a Bluetooth
mobile phone”).
4) Turn on the Bluetooth transmitter; it will connect to the
headset automatically.
Note:
- After successful multi-pairing, the paired devices will remem-
ber each other. You will not need to pair next time. If the
pairing information is deleted, connect the mobile phone with
the headset and then turn on the Bluetooth transmitter. Multi-
connecting can be performed.
- For a mobile phone supporting the HSP and A2DP at the same
time, you may set up a HSP and A2DP connection with the
headset simultaneously. At this time, the Bluetooth transmit-
ter must not be connected to the headset.
3. Reconnecting with a Bluetooth Device
1) Automatic connecting
Every time the headset is turned on, it will connect to the
last connected device automatically.
BTT010
(Fig. similar.
Not included.)
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for I-onik BTH-033 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of I-onik BTH-033 in the language / languages: English, German as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info