Manual Hyundai HY55U5 Android (page 11 of 154) (English, German, Dutch, French)

801948

Zoom out

Zoom in

1/154

English - 10 -

10. Help improve Android

Automatically send diagnostic information to Google,

like crash reports and usage data from your device

and apps. This information won't be used to identify

you. Select YesOK. To skip this

No and proceed by

pressing the OK button. You can change this setting

later using the Settings>Device Preferences>Usage

& Diagnostics menu on the Home Screen.

Information on Google services and some features of

your TV will be displayed next. You can turn on person-

al results for Assistant by choosing the related option

when prompted. Press OK consecutively to proceed.

11. Password

Depending on the country selection you made in the



(PIN) at this point. Press OK to proceed. The selected

PIN cannot be 0000. This PIN will be required in order

to access some menus, contents or to release locked

channels, sources etc. You will have to enter it if you

are asked to enter a PIN for any menu operation later.

12. Parental controls

Depending on your earlier selections you may be asked

to set your parental control preference in the next step.

You can block programmes according to their age

rating information by selecting one of the related options

󰀨󰀨

option. Highlight your selection and press OK or Right

directional button to continue.

13. Select TV Mode

In the following step of the initial setup, you can set

the TV’s operation mode either as Home or as Store.

Store 

environment. This option is intended only for store

use. It is recommended to select Home for home use.

14. Chromecast built-in always available

Select your chromecast availability preference. If set as

On your TV will be detected as a Google Cast device

and allow Google Assistant and other services to wake

your TV up to respond to Cast commands, even when

󰀨

15. Tuner Mode

Note: If you don’t want to perform a tuner scan, select one of

the available options anyway. You can skip the scan at some

later stage of the installation wizard. If you skip this step you

can perform a channel search later using the related Channels

menu options.

The next step is the selection of the tuner mode. Select

your tuner preference to install channels for Live TV

function. Antenna/Aerial, Cable and Satellite options

are available. Highlight the option that corresponds to

your environment and press OK or Right directional

button to proceed.

Antenna/Aerial

If Antenna/Aerial option is selected, the TV will search

for digital terrestrial and analogue broadcasts. On the

next screen highlight Scan option and press OK to

start the search or select Skip Scan to continue without

performing a search.

Note: If the country selected does not have analogue

broadcasts, the analogue search option may not be available.

Cable

If Cable option is selected, the TV will search for

digital cable and analogue broadcasts. If any, available

operator options will be listed on the Select Operator

screen. Otherwise this step will be skipped. You

can select only one operator from the list. Highlight

the desired operator and press OK or the Right

directional button to proceed. On the next screen

select Scan option to start a search or select Skip

Scan to continue without performing a search. If Scan

     

next. Scan Mode, Frequency(KHz), Modulation,

Symbol Rate(Ksym/s), Network ID options may need

to be set. To perform a full scan set the Scan Mode as

Full/Advance if available. Depending on the selected

operator and/or Scan Mode some options may not be

available to be set.

Note: If the country selected does not have analogue

broadcasts, the analogue search option may not be available.

Once you are done with setting available options,

press the Right directional button to proceed. The TV

will start to search available broadcasts.

Satellite

If Satellite option is selected, Satellite Type screen

will be displayed next. Preferred Satellite and General

Satellite options will be available. Select one and press

OK to proceed.

Note: Preferred Satellite and General Satellite options may

not be available depending on the selected country. In this case

the DVBS Conguration Setting screen will be displayed

after selecting the tuner mode as Satellite.

If Preferred Satellite option is selected, next screen

will be Select Operator screen. You can select only

one operator from the list. Highlight the desired

operator and press OK or the Right directional button

to proceed. Some of the following options may be

preset depending on the selected operator in this

step. Check the parameters before proceeding and

adjust if necessary.

 screens

will be displayed next. First antenna type should be set.

Direct, Single Cable, DiSEqC 1.0 and DiSEqC 1.1

options are available. Highlight the antenna type that

corresponds to your satelite system and press OK or

the Right directional button to proceed to the next step.

Depending on the country and antenna type selections

you made in the earlier steps of the initial setup

process, Load Preset List screen may be displayed

next. Highlight Load Preset List and press OK or the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai HY55U5 Android in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hyundai HY55U5 Android Manual

Product: