802248
10
Zoom out
Zoom in
Previous page
1/20
Next page
10
WARNING
Seek assistance when removing the compressor from its packaging.
4.0 Remove the compressor from its packaging and inspect for any damaged parts.
If anything is found to be missing or damaged, contact your supplier.
4.1 Take care to transport the compressor correctly, do not overturn it or lift it with hooks
or ropes.
4.2 Position the compressor on a flat, level surface or with a maximum permissible
inclination of 10°.
4.3 Site in a well-ventilated area.
4.4 If the surface is inclined and smooth, check if the compressor moves whilst in operation.
4.5 If the surface is in a raised position, make sure the compressor cannot fall, securing
it in a suitable way.
4.6 Connect your air supply hose to a ¼” male universal or industrial quick connector
coupler.
Connect the male quick connect coupler to the female quick connect coupler located
on the air compressor.
4.7 Make sure the drainage valve is off and that the pressure switch is in the OFF position.
4.8 Ensure that the power supply that you are going to use is operating normally.
4.9 Insert the power supply cord into the power supply socket.
NOTE
Before using the air compressor for the first time, complete a test run as follows:
4.10 Turn the power switch to the OFF Position.
4.11 Plug the power supply cord into a power supply socket.
4.12 Start the air compressor by turning the power switch to the ON position.
4.13 The pressure gauge reading will slowly rise as pressure increases inside the air tank.
4.14 When the gauge reading reaches working pressure, the pressure switch will
automatically torn the power off.
This indicates the compressor is working normally.
4.15 Turn the power switch to the OFF position, unplug the power supply cord and release
the air in the tank by pulling the safety valve.
4.16 If the compressor is not working properly, the pressure gauge will indicate that there
is a decrease in pressure in the air tank.
If there is an air leak from the compressor the pressure in the air tank decreases, the
pressure switch resets and the motor automatically turns back on.
4. PREPARATION
TEST RUN
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai HY5508 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai HY5508 in the language / languages: English as an attachment in your email.

The manual is 2.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info