Manual Hyundai Atos 2002 (page 203 of 249) (English)

664918

203

Zoom out

Zoom in

1/249

WHAT TO DO IN AN EMERGENCY

3-2

3. If coolant is running out under the car or

steam is coming out from under the bonnet

stop the engine. Do not open the bonnet

until the coolant has stopped running or the

steaming has stopped. If there is no visible

loss of coolant and no steam, leave the

engine running and check to be sure the

engine cooling fan is operating. If the fan is

not running, turn the engine off.

4. Check to see if the water pump drive belt is

missing. If it is not missing, check to see that

it is tight. If the drive belt seems to be

satisfactory, check for coolant leaking from

the radiator, hoses or under the car. (If the

air conditioner had been in use, it is normal

for cold water to be draining from it).

WARNING:

While the engine is running, keep hands and

clothing away from moving parts such as

the fan and drive belts to prevent injury.

5. If the water pump drive belt is broken or

coolant is leaking out, stop the engine imme-

diately and call the nearest Hyundai dealer

for assistance.

WARNING:

Do not remove the radiator cap when the

engine is hot since steam and boiling water

may be ejected from the radiator resulting in

burns or scalding.

CAUTION:

Personal injury and damage to the vehicle

may occur if jump starting is not performed

correctly. If any doubt exists as to how this

operation should be performed, seek assis-

tance from qualified personnel.

WARNING:

Motor vehicle batteries contain sulphuric

acid and emit hydrogen gas. Protective cloth-

ing should be worn and care exercised to

prevent the acid from coming into contact

with skin or clothing and the vehicle. Naked

lights should not be permitted in the vicinity

of the battery. Care should be exercised to

preventsparks occurring during connection.

If acid accidentally comes into contact with

skin or eyes, the affected area should imme-

diately be flushed with copious amounts of

water and medical assistance sought.

1. Ensure that the booster battery is 12 volt

type. If the booster battery is installed in

another vehicle, ensure that the two vehi-

cles are not touching.

2. Turn off all unnecessary electrical equip-

ment in both vehicles.

3. Ensure that the engine of the vehicle provid-

ing the jump start is running prior to connec-

tion of the jump cables.

4. Connect the red jump cable to the positive

(+) terminal of the booster battery and the

other end to the positive (+) terminal of the

discharged battery.

5. Attach the black jump cable to the negative

(-) terminal of the booster battery, and the

other end to a ground point within the engine

compartment of the vehicle with the flat bat-

tery. Do not connect to the negative battery

terminal of the flat battery since sparks may

be generated with the subsequent risk of

explosion.

6. Raise the booster vehicle engine speed to

2,000 r.p.m. and start the engine of the

vehicle with the flat battery.

7. Remove jump cables in the reverse order of

installation (black cable first).

NOTE:

If the jump cable is incorrectly installed,

damage to the vehicle electrical system may

occur, in particular the electronic compo-

nents such as the Fuel Injection system

computer and the Automatic Transaxle com-

puter. The battery must never be discon-

nected whilst the engine is running.

XD040A1-E

IF THE ENGINE OVERHEATS

If the temperature gauge indicates overheating:

1. Pull off the road and stop as soon as it is

safe to do so.

2. Place the gear selector lever in "P" (auto-

matic), or neutral (manual transaxle, semi-

automatic transalxe) and set the parking

brake. If the air conditioner is on, turn it off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai Atos 2002 in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hyundai Atos 2002 Manual

Product: